SKF PER.UC207-23-C y-bearing (insert bearing)

SKF PER.UC207-23-C is a reference of y-bearing (insert bearing), within Bearings. Request a quote for PER.UC207-23-C via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF Y-bearing insert of the PER.UC-C series is a single row bearing with an extended inner ring and set screw locking. It is used in equipment where the shaft rotates and you need to mount it quickly on solid shafts, without special machining. It is a common solution in transport, agriculture and industrial plants. At MR Accesorios Industriales we sell it as a brand and help you choose the correct part number for your application.

The PER.UC-C series designation reads as follows: PER indicates it is a Y-bearing insert, UC corresponds to the design with extended inner ring and set screw locking, and -C indicates a design variant of the sealing. The numbers that follow identify the size: for example, PER.UC204-C and PER.UC204-12-C share the same shaft diameter, but the additional suffix -12 defines an inch shaft size. The same applies to PER.UC206-C and PER.UC206-19-C, or PER.UC207-C and PER.UC207-23-C. The complete part number gives you the shaft diameter and the locking type.

These bearings are used in conveyor belts, bucket elevators, mixers, fans, machines for the food industry and agricultural equipment. In Argentina they are common in food plants, feedlots, flour mills and plastics factories. They also appear in packaging lines and in internal warehouse transport. Their spherical outer ring allows a certain misalignment when mounted in split plummer block housings or take-up units, which simplifies assembly and reduces alignment requirements between supports.

To select the Y-bearing insert, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The PER.UC-C series comes with contact sealing that retains grease and blocks dust and moisture. Set screw locking requires the shaft to be solid and clean; tighten the screws with the appropriate wrench and verify that the inner ring is well centered. If the equipment works with a lot of vibration, check the fit periodically. Factory lubrication is usually sufficient, but in humid environments or with high temperatures it is advisable to follow the maintenance plan.

As for equivalents, Y-bearing inserts with extended inner ring and set screw locking from different brands can be interchanged if the main dimensions and the locking type match. Do not rely only on the part number: verify the shaft diameter, the overall width and the screw thread. The SKF PER.UC-C series has counterparts in other brands, but each manufacturer may vary the sealing or the internal clearance. If in doubt, send us the shaft measurements and a photo of the old bearing.

If you need to replace a Y-bearing insert, write to us on WhatsApp and send us the complete part number, for example PER.UC208-C or PER.UC210-31-C. At MR Accesorios Industriales we quote you and give you compatible alternatives. We work with SKF as a brand and can advise you so that the mounting is correct.