Y-bearing (insert bearing) SKF PER.UC206AT-B

SKF PER.UC206AT-B is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.UC206AT-B via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PER.UC AT-B series Y-bearing is an insert bearing with an extended inner ring, designed to be mounted in split plummer block or pillow block housings. It is used in equipment where the shaft rotates at moderate speeds and loads are mainly radial, with some axial load. Its design allows it to be fixed to the shaft with set screws and housed in standard housings, which simplifies assembly and replacement in the plant. MR Accesorios Industriales sells this line as part of its range of bearings for industrial maintenance.

The designation of this series combines letters and numbers that identify the bearing type and its variants. PER indicates a Y-bearing with extended inner ring; UC defines the dimension series and the set screw locking system; the digits that follow (for example, in PER.UC206AT-B, PER.UC207AT-B or PER.UC208AT-B) correspond to the bore size and outside diameter. The suffix AT-B indicates a specific design of the seal and outer ring, which may include a lubrication groove or a particular geometry. To choose the correct part number, always compare the shaft and housing dimensions with the manufacturer's table.

These bearings are used in transmission and conveying equipment operating in environments with dust, humidity or moderate vibration. They are commonly found in conveyor belts, grain elevators, mixers, mills, centrifugal pumps and industrial fans. In Argentina, the sectors that use them most are agro-industry, food processing, cement and aggregate processing. They also appear in road machinery and material handling equipment, where quick maintenance and replacement without dismantling the entire shaft are an advantage.

To select the right Y-bearing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The AT-B seal protects against the entry of contaminants and loss of lubricant; if the equipment works with water or fine dust, it is advisable to check the condition of the sealing lips. Mounting is done on the shaft with the set screws of the inner ring, which must be tightened with a torque wrench according to the recommended torque. It is essential to align the housing with the shaft to avoid parasitic stresses and extend service life. Lubrication can be with lithium or lithium complex grease, depending on the working temperature.

When replacing a Y-bearing, it is common to find equivalences between brands: different commercial designations may share the same main dimensions and the same locking type. However, not all variants are interchangeable, because the seals, internal clearance or bore tolerance may differ. Therefore, the safest approach is to compare the shaft dimensions, outside diameter and total width, as well as the locking system. If you have doubts, consult us with the original part number and the housing dimensions.

At MR Accesorios Industriales we sell SKF PER.UC AT-B series bearings so you can handle the replacement of your equipment with reliable components. If you already have the part number of the bearing you need, send it by WhatsApp along with a photo or the shaft and housing dimensions. Our technical team helps you confirm the correct designation and request a quote for the quantity you need.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.