Y-bearing (insert bearing) SKF PER.SUC206-A

SKF PER.SUC206-A is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.SUC206-A via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PER.SUC Y-bearing is an insert with an extended inner ring and two set screws for shaft fixing, designed for split plummer block or pillow block housings. It is used in equipment where quick mounting and dismounting matter, such as conveyor belts, mixers or fans. Its self-aligning and sealed design makes it suitable for environments with dust or moderate humidity. MR Accesorios Industriales sells this line as an official brand.

The PER.SUC designation identifies the series of inserts with set screws. The number that follows —204, 205, 206, 207, 208— indicates the bore diameter size: the higher the number, the larger the shaft. The -A suffix distinguishes a construction variant within the series. In the examples, PER.SUC205-16-A indicates an inch measurement (16/16"), while PER.SUC205-A corresponds to the metric version. Always verify the complete code before requesting a quote.

These Y-bearings are used in belt conveyors, bucket elevators, mixers, dryers and process equipment in food, chemical and aggregate plants. In Argentina they are common in the oilseed, meatpacking and waste treatment industries. Their extended inner ring allows mounting on ground shafts with h6 tolerance, and the set screws prevent axial displacement in low to medium speed applications.

To select the insert, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. Single or double lip sealing protects against dust and splashes; in very humid environments or with frequent washing, a version with an additional seal is advisable. When mounting, align the housing and tighten the set screws with a torque wrench according to the recommended torque. Lubricate with lithium grease before starting up.

Y-bearings from different brands are usually interchangeable if the main dimensions match: bore diameter, outer diameter and outer ring width. However, suffixes and tolerances may vary between manufacturers. To replace an insert, compare the complete code and the actual shaft and housing measurements. If you have doubts, consult us with the original designation and dimensions.

MR Accesorios Industriales sells the SKF line of Y-bearings for all Argentine industry. If you need a PER.SUC insert, send us the complete code via WhatsApp and we will provide a quote. We can also advise you on selecting the compatible housing and mounting accessories.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.