Y-bearing (insert bearing) SKF PER.SCH-1612

SKF PER.SCH-1612 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.SCH-1612 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF Y-bearing of the PER.SCH series is an insert with an extended inner ring and set screw locking system, designed to be mounted in split or pillow block housings. It is used in equipment that requires a simple bearing unit, easy to mount and dismount, with good misalignment tolerance. MR Accesorios Industriales carries this line and helps you choose the correct part number for your application.

The designation PER.SCH reads as a category of Y-inserts with specific design features. The four-digit numeric suffix, as in PER.SCH-1612 or PER.SCH-2020, identifies the combination of shaft diameter and outer diameter that defines the bearing size. In this series, the letters PER and SCH refer to an insert design with an extended inner ring and set screw locking. To select the exact part number, have the shaft and housing dimensions on hand.

These bearings are used in power transmission and conveying equipment operating at moderate speeds, such as conveyor belts, elevators, mixers, fans and food or agricultural machinery. In Argentina, you'll find them in milling plants, meat processing plants, aggregate treatment plants and packaging lines. Their insert format allows replacement without disassembling the entire housing, which reduces maintenance time on critical continuous production equipment.

To choose correctly, verify that the shaft diameter matches that of the inner ring and that the housing is compatible with the outer diameter of the insert. The set screw locking system requires the shaft to have adequate hardness and finish; if the shaft is worn, a repair sleeve should be considered. Factory lubrication can be supplemented depending on the environment: in the presence of moisture or dust, choose seals with an additional lip. Alignment between housings is key to avoiding parasitic axial loads.

When looking for equivalents, keep in mind that each manufacturer uses its own nomenclature for Y-inserts. Interchangeability is not automatic: shaft diameter, outer diameter, inner ring width, locking type and sealing must be compared. Some brands offer equivalent lines with different part numbers, but tolerances and load capacities may vary. Therefore, before replacing with another brand, it is advisable to validate the critical dimensions and mounting type with a technical advisor.

If you already have the full part number, such as PER.SCH-1612, PER.SCH-2020 or any other variant of the series, send it by WhatsApp to MR Accesorios Industriales. We'll send you a quote with no obligation. If you're not sure of the part number, tell us the shaft and housing dimensions and the type of equipment where it is mounted, and we'll help you identify it. With more than 80 years in the business, at MR we know the details that make the difference.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.