Product page
Y-bearing (insert bearing) SKF PER.HC305A-A
- Manufacturer Part Number
- PER.HC305A-A
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
Other brands in this family
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PER.HC305A-A is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.HC305A-A via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF PER.HC Y-bearing is an insert with split housing, designed to be mounted on shafts and housings that allow misalignment. It is used in equipment where the load combines radial and axial forces, and where mounting requires some alignment tolerance. Its design with seal and screw locking makes it suitable for power transmission in demanding conditions. MR Accesorios Industriales sells this line as an official brand.
The designation PER.HC identifies a Y-bearing with split housing. The suffix HC indicates an execution with specific sealing and locking characteristics, and the final letter A indicates a construction variant within the series. The example PER.HC305A-A shows how the fixed letters combine with the number that defines the shaft diameter and the variant code. To choose the correct insert, you must read that complete sequence and not rely only on the number.
These bearings are used in conveyors, belts, elevators, mixers and process equipment where the shaft rotates on split housings. In Argentina they appear in food, cement, mining plants and in packaging lines, where quick mounting and dismounting is key. They are also found in agricultural machinery and in industrial ventilation systems that work with dust or moisture.
To select correctly, take into account the type of seal required by the environment: a place with abrasive dust is not the same as one with frequent washdowns. Check the housing alignment and internal clearance before tightening the locking screws. Lubrication must be suitable for the working temperature, and mounting must avoid impacts on the outer ring. Poor alignment shortens the life of the insert even if the bearing is the correct one.
Y-bearings are interchangeable between brands by their dimensional designation and housing type, but each manufacturer may vary seals, tolerances or locking system. Do not replace one code with another just because the number matches: compare the complete execution. If you have doubts, the original bearing code is the best reference to find the equivalent within the SKF line or between manufacturers.
If you need to replace a PER.HC Y-bearing, send the complete code by WhatsApp to MR Accesorios Industriales. With that data we can guide you on the correct variant and prepare your quote.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the HC suffix mean in the PER.HC designation?
- The HC suffix indicates a specific execution within the PER series, with its own sealing and locking characteristics. It does not change the shaft diameter, but it does change the behavior against contaminants and loads. To confirm the exact variant, send the complete code by WhatsApp.
- How do I choose between a split and a solid Y-bearing?
- The split one is used when mounting on the shaft or housing requires opening the housing without disassembling the whole assembly. The solid one is simpler if the shaft can be inserted from the side. The choice depends on access and the type of load. Consult us with the drawing or the code.
- Is this bearing suitable for axial loads?
- Y-bearings are mainly designed for radial loads, although they accept some axial force depending on the design. For significant axial loads, it is advisable to evaluate another family. Send us the working conditions and we will guide you without obligation.