Y-bearing (insert bearing) SKF PER.HC209AT-A

SKF PER.HC209AT-A is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.HC209AT-A via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF Y-bearing from the PER.HC series is an insert with an extended inner ring and a set screw locking system, designed to be mounted in split plummer block or pillow block housings. It is used in equipment that requires a simple, robust bearing unit that is easy to align. Its sealed construction makes it suitable for dusty, humid or splash-prone environments, and it is a common solution in belt or chain drives, fans and conveyors. MR Accesorios Industriales supplies this line, with technical advice to choose the right size.

The series designation combines letters that indicate the insert type and the sealing. PER identifies the category of Y-bearings with an extended inner ring; HC indicates an execution with higher load capacity or special treatment; AT refers to the locking type, in this case with set screws on the inner ring. Examples in the series, such as PER.HC205AT-A or PER.HC209AT-A, show that the central number (205, 206, 207, 208, 209) is associated with the shaft diameter and the overall size of the insert. The suffix -A may indicate a sealing or tolerance variant, always according to the complete designation.

These bearings are used in a wide variety of industrial applications in Argentina. They are found in belt conveyors, bucket elevators, mixers, centrifugal fans and equipment for the food, cement, mining and agricultural industries. They are also common in grain processing machines, aggregate treatment plants and irrigation systems. Their design allows them to be mounted in split plummer block or pillow block housings, which facilitates maintenance and replacement in continuously operating equipment.

To select the right Y-bearing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. Sealing is key: in dusty or humid environments, choose the version with greater protection seals. Internal clearance and lubrication must be those indicated for the operating speed. During mounting, ensure correct alignment between the shaft and the housing, and tighten the set screws with a torque wrench to the recommended torque to avoid deformation.

Regarding equivalences, Y-bearings from different brands can be interchanged if the main dimensions (bore, outside diameter and width) and the locking type match. However, not all suffixes mean the same thing between manufacturers, so it is essential to verify the complete designation and tolerances. To replace a Y-bearing, compare the dimensions and the sealing system; if in doubt, consult a specialist. MR Accesorios Industriales can help you identify the correct reference.

If you need a quote for this SKF Y-bearing, send us the complete code on WhatsApp. At MR Accesorios Industriales we advise you so you can choose the option that best suits your equipment, with more than 80 years of experience in the field. Write to us and we will reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.