Deep groove ball bearing SKF PER.6802-2RSU

SKF PER.6802-2RSU is a deep groove ball bearing reference, within Bearings. Request a quote for PER.6802-2RSU via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PER.2RSU series deep groove ball bearing is a single-row bearing with contact seals on both sides, designed to carry moderate radial and axial loads in both directions. Its sealed construction makes it suitable for environments with dust, moisture or splashes, where the goal is to retain lubricant and block contaminants. It is available in metric and inch sizes, and is used in electric motors, pumps, fans, conveyors and agricultural machinery, among other industrial applications.

The designation PER.2RSU is interpreted as follows: the prefix PER. identifies the thin-section deep groove ball bearing series, and the suffix 2RSU indicates that the bearing has contact seals on both sides (2RS) and a snap ring groove (U). A specific example is PER.6802-2RSU, where 6802 corresponds to a thin-section size. If you need to confirm the nomenclature of another size, send us the complete part number and we will verify it.

In Argentine industry, these bearings appear in low and medium power electric motors, centrifugal pumps, fans, conveyor belts, machine tools and agricultural equipment. They are also found in applications where radial space is limited, such as compact gearboxes or light transmission mechanisms. Because they are sealed, they tolerate dusty or humid environments without losing lubrication, which reduces maintenance in food, textile, ceramic and aggregate processing plants.

To select the correct bearing, take into account the shaft diameter, the housing and the type of load. The 2RSU seal comes factory-lubricated and does not require additional greasing; if the equipment runs at high speed or temperature, verify that the seal is suitable. During mounting, ensure correct alignment between shaft and housing, and avoid striking the seals. To remove it, use pullers that rest on the inner ring. Additional lubrication is only possible in open designs.

Deep groove ball bearings are interchangeable between brands if the main dimensions (bore, outer diameter and width) and the seal type match. Thin-section series usually have equivalents from other manufacturers, but suffixes may vary: for example, a contact seal may be identified as 2RS, 2RSH or similar. Always verify the complete part number and tolerances before replacing. At MR Accesorios Industriales we carry SKF as an official brand and can advise you on the equivalent.

If you already have the part number of the bearing you need, send it by WhatsApp to MR Accesorios Industriales and we will send you the quote. We can also advise you if you are unsure between a sealed and an open design, or if you need a special size. With more than 80 years in the business, at MR we know the applications and help you choose well.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.