Y-bearing (insert bearing) SKF PER.207HRRB58

SKF PER.207HRRB58 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.207HRRB58 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PER.HRRB series Y-bearing is an insert with an extended inner ring and set screw locking system, designed to be mounted in split or pillow block housings. It is used in equipment where the shaft rotates and requires alignment and protection against contaminants. MR Accesorios Industriales supplies this line for plants and workshops throughout Argentina.

The PER.HRRB series designation combines the shaft diameter with a variant code. For example, PER.205HRRB2 corresponds to a 25 mm shaft, while PER.207HRRB12 and PER.207HRRB58 share the same diameter but differ in the outer ring design or the sealing type. The final numeric suffixes indicate construction versions within the same size; therefore, when ordering a replacement, the diameter alone is not enough: you must provide the complete part number.

These Y-bearings are found in belt conveyors, bucket elevators, mixers, mills, packaging belts and process equipment in food, chemical and aggregate plants. In Argentina they are common in the oilseed, meatpacking and cement industries, where dust, humidity or washdown require effective sealing. Their extended inner ring allows them to be mounted on unmachined shafts and locked with set screws, which simplifies field maintenance.

To select the correct insert, check the shaft diameter, the housing type and the environmental conditions. The sealing of the HRRB series is designed to retain grease and block contaminants; if the equipment operates with water or fine dust, it is advisable to review the sealing variant. Internal clearance and lubrication must follow the manufacturer's instructions for each application. During mounting, align the housing and tighten the set screws onto the shaft with the appropriate wrench, without striking the outer ring.

Y-bearings are interchangeable between brands if the main dimensions match: shaft diameter, outer diameter, width and locking system. However, sealing suffixes and tolerances may vary, so a part number from another brand does not always directly replace the original. At MR Accesorios Industriales we can advise you on equivalences and alternatives within the SKF line we supply.

If you already have the part number engraved on the bearing or the housing, send it by WhatsApp to MR Accesorios Industriales and we will quote the exact part. We can also help you identify the series if you only have the shaft and housing dimensions. More than 80 years supporting Argentine industry with power transmission components.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.