SKF PER.206RP2 y-bearing (insert bearing)

SKF PER.206RP2 is a reference of y-bearing (insert bearing), within Bearings. Request a quote for PER.206RP2 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF PER RP series Y-bearing is an insert with an extended inner ring and a set screw locking system, designed to be mounted in split plummer block or pillow block housings. It is used in equipment where the bearing must be locked to the shaft and housed in a split housing, such as conveyors, mills and mixers. MR Accesorios Industriales sells this line and advises you on choosing the correct part number for your application.

The PER RP series designation is read in parts: PER identifies the category of Y-bearings with an extended inner ring and set screw locking; RP indicates the seal type and the insert's features. The examples PER.205RP8 and PER.206RP2 show that the central number (205, 206) defines the shaft diameter and the bearing size, while the final suffix (RP8, RP2) distinguishes seal or design variants. To choose the exact part number, always verify the shaft diameter and the type of housing where it will be mounted.

These bearings are used in industries such as food, cement, mining and material handling. In Argentina they are common in belt conveyors, bucket elevators, mixers, mills and process equipment operating with rotating shafts and moderate loads. Their design allows them to be mounted in split plummer block housings, which makes replacement easier without disassembling the whole assembly. They are also used in agricultural machinery and drive systems where firm but removable locking is required.

To correctly select a PER RP Y-bearing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The RP seal protects against dust and moisture, but if there is exposure to liquids or fine particles, the sealing should be verified. During mounting, make sure the shaft is clean and free of burrs, and tighten the set screws with the proper wrench to prevent the inner ring from turning on the shaft. Lubrication must be the one specified by the manufacturer and renewed according to the duty cycle.

As for equivalents, Y-bearings from different brands can be interchanged if the main dimensions and the locking type match, but not all suffixes mean the same thing. A code with SKF's RP seal may have an equivalent in another brand under a different designation. Therefore, the safest approach is to compare the shaft dimensions, the overall width and the outer diameter before replacing. MR Accesorios Industriales can help you find the correct interchangeability.

If you need a quote for a PER RP Y-bearing, send us the complete part number by WhatsApp. At MR Accesorios Industriales we reply promptly and offer alternatives if the exact part number is not in the catalogue. We can also advise you on the right housing and mounting accessories. Write to us and we will send you a quote with no obligation.