SKF NU 1036 M/C3VA301 cylindrical roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Cylindrical roller bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF NU 1036 M/C3VA301
- NU 10Series
- Cylindrical roller bearings, NU 10 series. For the same bore, each series has a different outside diameter and width.
- 36Bore
- 180 mm bore: 36 × 5.
- M/C3VA301Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
NU 1036 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF NU 1036 M/C3VA301 bearing has a 180 mm bore, a 280 mm outside diameter and a 46 mm width (180 x 280 x 46 mm).
SKF NU 1036 M/C3VA301 is a reference of cylindrical roller bearing, within Bearings. Request a quote for NU 1036 M/C3VA301 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF NU series cylindrical roller bearing is a component designed to withstand high radial loads and considerable speeds. Its design with cylindrical rollers and machined brass cage allows precise operation in demanding industrial applications. The M/C3VA301 variant incorporates a C3 internal radial clearance and a special surface treatment that improves wear resistance. It is a reliable solution for rotating equipment where load capacity and durability are critical.
The NU designation identifies cylindrical roller bearings with two ribs on the outer ring and none on the inner ring, which allows relative axial displacement. The M suffix indicates a machined brass cage, suitable for high loads. The C3 combination defines an internal radial clearance greater than normal, useful when thermal interference exists. VA301 indicates a special execution with a coating or surface treatment, as specified by the manufacturer. The example NU 1036 M/C3VA301 shows how these codes are integrated into a single identifier.
This type of bearing is used in industries such as steel, cement, paper and mining, where equipment operates under heavy loads and severe conditions. In Argentina, it is commonly found in gearboxes, mills, high-flow pumps, industrial fans and machine tools. Its ability to withstand radial loads and compensate for misalignment makes it suitable for gear transmissions and large-diameter shafts. MR Accesorios Industriales supplies this SKF line to serve plants and factories throughout the country.
When selecting an NU bearing, verify that the C3 radial clearance is compatible with the shaft and housing tolerances, especially if there are thermal gradients. The M brass cage requires adequate lubrication; choose the lubricant according to speed and operating temperature. During mounting, ensure precise alignment between the supports and avoid impacts that could damage the rollers or raceways. Sealing will depend on the environment: in contaminated environments, consider additional protections. Follow the manufacturer's recommendations for fitting and cleaning.
SKF cylindrical roller bearings can be interchanged with equivalent products from other brands, provided the main dimensions, radial clearance and cage type match. The NU designation is standard, but suffixes may vary between manufacturers; therefore, it is essential to verify the technical specifications before replacing. At MR Accesorios Industriales we can guide you on equivalences and the alternatives that best suit your equipment, without compromising performance.
To receive an accurate quote, send the full bearing part number via WhatsApp, for example NU 1036 M/C3VA301. Our technical team will review your inquiry and respond promptly. You can also ask us about other variants of the NU series or about cylindrical roller bearings in general. At MR Accesorios Industriales we are here to advise you and help you find the right solution for your industrial application.
Dimensions
Boundary dimensions of the basic designation NU 1036 per ISO 15: 180 x 280 x 46 mm (d x D x B).
- Bore
- 180mm
- Outside diameter (D)
- 280mm
- Width (B)
- 46mm
The same size in other brands
Pages from other brands with the basic designation NU 1036: 180 x 280 x 46 mm (d x D x B) per ISO 15.
- FAGNU1036-XL-M1
- NSKNU1036M
- NTNNU1036
- RKBNU 1036
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF NU 1036 M/C3VA301 bearing?
- The SKF NU 1036 M/C3VA301 bearing has a 180 mm bore, a 280 mm outside diameter and a 46 mm width (180 x 280 x 46 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation NU 1036.
- What does the C3 suffix mean on this bearing?
- The C3 suffix indicates an internal radial clearance greater than normal. It is used when operating conditions generate thermal differences between the shaft and the housing, or when interference fits are required. It is important to verify that this clearance is suitable for your application.
- Does this bearing allow misalignment?
- NU series cylindrical roller bearings are not designed to compensate for significant angular misalignment. For optimal operation, precise alignment between the supports must be ensured. If your equipment has misalignment, evaluate other solutions.
- How do I request a quote for this bearing?
- Send the full bearing part number via WhatsApp to MR Accesorios Industriales. Include the exact designation, such as NU 1036 M/C3VA301, and any additional details about your application. We will respond with the information needed to proceed.