SKF LL/POLIAMIDA 3/8 centralized lubrication component

SKF LL/POLIAMIDA 3/8 is a reference of centralized lubrication component, within Greases and lubrication. Request a quote for LL/POLIAMIDA 3/8 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LL/POLIAMIDA line components from SKF Lincoln are part of centralized lubrication systems: pumps, metering devices, fittings, hoses, and connectors that supply lubrication points automatically and in a controlled manner. They are used in equipment where leaving lubrication to the operator is not an option, because missing a single point leads to premature wear. MR Accesorios Industriales distributes this line and helps you identify the exact spare part from your system's part number.

The designation of these components combines letters and numbers that refer to the Lincoln part number. In the examples LL/POLIAMIDA 3/8 and LL/POLIAMIDA-3/16, the initials LL identify the line family and POLIAMIDA the material of the body or connection element; the number that follows —3/8, 3/16— corresponds to the thread or connection size of the component. It is not a nomenclature that reads like a bearing's: each specific code defines a part with its own function within the system. Therefore, to request a quote, the complete code is the key piece of information.

These components are found in production lines, food and beverage plants, cement plants, mining, material handling equipment, and heavy vehicle fleets. In Argentina they appear both in new installations and in the replacement of systems that have been running for years. The logic is always the same: a central pump drives the lubricant and a network of metering devices, fittings, and hoses distributes it to each point. When a component of that network fails, the point stops being lubricated and the damage appears far from the centralized system.

To choose the right component from this line, first identify its function within the system: an outlet fitting is not the same as a metering device or a hose section. Then check the connection size and thread type, because sealing without leaks depends on that. Also verify compatibility with the lubricant you use and with the pump's working pressure. During assembly, clean the connections before putting them together, do not force threads, and make sure no points are left unfed after purging the line.

Interchangeability between brands in centralized lubrication is not automatic. Even if two components look the same on the outside, they may differ in flow rate, opening pressure, or connection type, and that affects lubricant distribution throughout the network. It is advisable to maintain the logic of the original system and replace with a component equivalent in function, not just in size. If your system is SKF Lincoln, the most direct approach is to start from the part number on the old component or in the installation drawing.

If you have the code on hand, send it via WhatsApp to MR Accesorios Industriales and we will quote the component. If you cannot find it, take a photo of the part or the section of the system where it is mounted and we will identify it together. We can also review the component list of your line to put together the complete order. If the system has been around for a while, it has probably already passed through our hands.