Centralized lubrication component SKF LL/G120

SKF LL/G120 is a centralized lubrication component reference, within Greases and lubrication. Request a quote for LL/G120 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

LL/G series components are parts and spare parts for SKF Lincoln centralized lubrication systems: pumps, metering devices, fittings, hoses and connectors that feed lubrication points automatically and in a controlled way. They are used when several points must be lubricated from a single unit, with regulated quantity and frequency. MR Accesorios Industriales supplies this line and helps you identify the exact component from the part number.

The LL/G designation does not follow a dimensional logic like a bearing: it is a Lincoln part number. Each combination, such as LL/G120 or LL/G300, identifies a component with its own function and connection within the system. The numeric values do not indicate diameter or flow rate; to know which part each one corresponds to, you must consult the equipment's parts breakdown. If you have the code stamped on the part or in the manual, send it and we will verify it.

These components are found in production lines, machine tools, mining equipment, cranes, presses and material handling, where manual lubrication is out of reach or simply not possible. In food, cement, steel and waste treatment plants, a centralized system keeps critical points greased without stopping the machine. They are also replaced in old equipment that is still running and needs the correct spare part so the installation does not have to be modified.

To choose correctly, first look at the component's function: pump, metering device, fitting, hose or connector. Then check the connection and the type of lubricant the system handles, because not all materials are compatible with all greases. During assembly, take care with line cleanliness and purging, and respect the orientation of the metering devices. A line with air or dirt does not meter properly and punishes the pump. If in doubt, send us a photo of the part and the code.

In centralized systems, spare parts from different brands are not always interchangeable: threads, flow rates and working pressures change. The LL/G series follows Lincoln nomenclature, so equivalence is found by function and connection, not by similar-looking codes. When replacing a component, compare the original equipment data sheet with that of the spare part and confirm that the line supports the same pressure. If there is no direct equivalent, it can be adapted with a new fitting or hose.

If you have the LL/G code on hand, send it by WhatsApp to MR Accesorios Industriales along with the equipment where it is installed. With that we identify the component and send you the quote. We can also review the parts breakdown if you send us a photo of the nameplate or the system. We work with the SKF Lincoln line and the rest of the lubrication range so your machine is not stopped by a small part.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.