SKF LAGM 1000E-1 greases and lubrication
- Brand
- SKF
- Category
- Greases and lubrication
- Subcategory
- Greases and lubrication
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF LAGM 1000E-1 is a reference of greases and lubrication, within Greases and lubrication. Request a quote for LAGM 1000E-1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF LAGM 1000E grease meter is a flow meter that is inserted between the grease gun and the point to be lubricated. It allows you to see and regulate how much grease enters each application, which is key when excess or lack of lubricant shortens bearing life. MR Accesorios Industriales sells it as part of its grease and lubrication line.
The LAGM designation identifies the grease meters in the SKF line. The number that follows, such as 1000, indicates the model within the category, and the suffix E indicates the version with a standard connection to couple to the grease gun. In the example LAGM 1000E-1, the hyphen and the final number distinguish the thread or adapter variant. If your code has another ending, send it to us and we will verify it together.
It is used in food, cement, mining, paper, water treatment plants and any industry with preventive lubrication plans. Also in maintenance workshops that set up greasing routes and need to record consumption per point. In Argentina, where many plants coexist with old and new equipment, the meter helps standardize the dose without depending on the operator's eye.
To select it, first look at the thread of your grease gun and the type of grease you use: the meter works with usual NLGI consistencies, but it is advisable to confirm compatibility with the manufacturer. Mounting is direct, between the grease gun outlet and the coupling to the point. Check that there are no leaks, purge the air before measuring and record the amount applied per point to adjust the plan.
As for equivalences, grease meters are not replaced by just any accessory: each manufacturer defines its range and its connection. If you are looking for an alternative, first compare the measuring range, the thread and compatibility with the grease. If in doubt, consult us with the complete code and we will guide you.
If you have the code of the meter or that of the grease gun you use, send it by WhatsApp to MR Accesorios Industriales. With that data we verify the exact variant and send you the quote. We also work with other brands, so we can advise you on the entire lubrication assembly.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What is the difference between the LAGM 1000E and the LAGM 1000E-1?
- The final suffix indicates a connection or adapter variant. Both measure grease flow, but the thread or the coupling may change. To know which one goes with your grease gun, send us the complete code and we will confirm it.
- Can it be used with any type of grease?
- It is designed for greases of the usual consistency in industrial maintenance. If you use a very fluid or very hard grease, consult us first: the reading may be affected. Always verify compatibility with the lubricant manufacturer.
- How do I request a quote for the SKF LAGM meter?
- Write to us on WhatsApp with the exact code that appears on your equipment or in the manual. With that data we identify the model and send you the quote. We can also advise you if you need the complete assembly with grease gun and couplings.