SKF LAGD 125/WA2 automatic lubricator

SKF LAGD 125/WA2 is a reference of automatic lubricator, within Greases and lubrication. Request a quote for LAGD 125/WA2 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF SYSTEM 24 automatic lubricator is a gas-driven single-point device that supplies grease continuously and in a controlled manner to bearings, linear guides, chains and other lubrication points. It comes pre-filled with SKF grease and is installed directly at the point to be lubricated, with no need for electrical connection or air lines. It is a practical solution for hard-to-reach places or for equipment that must operate without interruption for prolonged periods.

The designation of these lubricators combines the letters LAGD with a number that indicates the capacity in milliliters or cubic centimeters, followed by a slash and a suffix that identifies the pre-filled grease. For example, LAGD 60/WA2 corresponds to a 60 ml lubricator filled with LGWA 2 grease, while LAGD 125/WA2 has 125 ml of the same grease. Other possible suffixes are HB2 for LGHB 2 grease and FG for food-grade greases. Knowing the suffix is key to choosing the right lubricant for the application.

These lubricators are used in a wide variety of industries in Argentina, such as food, cement, mining, paper and water treatment, among others. They are common in electric motors, pumps, fans, chain conveyors and process equipment where access for manual relubrication is complicated or risky. They are also used in machines that operate in humid, dusty or vibrating environments, where maintaining a constant lubricant film extends bearing life.

To select the right lubricator, take into account the type of grease required by the point to be lubricated and the volume needed according to the bearing size and relubrication frequency. Installation is simple: it is threaded directly into the lubrication point or connected via a flexible tube. It is important to verify alignment and clean the area before mounting to avoid contamination. Once activated, the internal gas generates constant pressure and releases the grease uniformly during the discharge period.

Regarding equivalents, automatic lubricators from other brands can be replaced by SKF SYSTEM 24 as long as the connection threads and the type of grease are respected. It is not a bearing or a structural component, but a lubrication device that must be chosen for chemical compatibility with the existing lubricant and for environmental conditions. If you have doubts, the complete lubricator part number (for example, LAGD 125/WA2) is the safest reference for requesting a quote.

To request a quote for the SKF SYSTEM 24 automatic lubricator you need, send us the complete part number via WhatsApp at MR Accesorios Industriales. We can advise you on the best option for your equipment. Write to us and we will respond shortly.