Product page
Spherical plain bearing SKF GEH 70 ES
- Manufacturer Part Number
- GEH 70 ES
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Spherical plain bearings and rod ends
Other brands in this category
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF GEH 70 ES is a spherical plain bearing reference, within Bearings. Request a quote for GEH 70 ES via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
SKF GEH ES radial spherical plain bearings are spherical sliding bearings that allow oscillating movements and alignment between shafts. They are used in applications where misalignment and combined loads must be absorbed, such as hydraulic cylinders, steering systems and lifting mechanisms. MR Accesorios Industriales carries this line as part of its SKF bearing offering, with technical advice to select the right size.
The GEH ES designation identifies a radial spherical plain bearing of the GEH series, with a cylindrical bore and steel cage. The number that follows indicates the bore diameter in millimeters: for example, GEH 70 ES corresponds to a 70 mm bore. The ES suffix indicates that the spherical plain bearing has lubrication grooves and holes in both rings, which facilitates greasing and extends service life.
These spherical plain bearings are used in industries such as metallurgy, automotive, agriculture and construction. In Argentina it is common to find them in hydraulic cylinders of road machinery, in steering systems of heavy vehicles, in crane arms and in earthmoving equipment. They also appear in presses and in transmission mechanisms that require controlled oscillation.
To select a GEH ES, take into account the radial and axial load it will bear, the oscillation angle and the environmental conditions. Sealing is key: if there is dust or moisture, additional protections should be evaluated. Lubrication must be periodic with good quality grease, and mounting must ensure alignment between the shafts to avoid parasitic stresses. Adequate internal clearance ensures smooth operation.
SKF GEH ES spherical plain bearings are interchangeable with other brands that follow the same standardized designation, such as INA, NSK or NTN. However, always verify the tolerances and the cage type, because they can vary between manufacturers. MR Accesorios Industriales can advise you on equivalences and alternatives for your specific application.
If you need a GEH ES spherical plain bearing for your equipment, send us the complete code via WhatsApp. At MR Accesorios Industriales we advise you so you find the right part and we coordinate the quote with no obligation.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the ES suffix in a GEH spherical plain bearing mean?
- The ES suffix indicates that the spherical plain bearing has lubrication grooves and holes in both rings, which allows effective greasing of the spherical plain bearing. This is important for applications with oscillating movements where periodic lubrication extends the service life of the component.
- How do I choose between a GEH and a GE spherical plain bearing?
- The GEH series has a more robust design and higher load capacity than the GE series. If your application requires bearing higher loads or severe conditions, the GEH is the recommended option. Consult us with your equipment data for advice.
- Are SKF GEH ES spherical plain bearings compatible with other brands?
- Yes, SKF GEH ES spherical plain bearings follow standardized designations and are interchangeable with those of other brands that comply with the same standard. However, always verify the tolerances and the cage type, since there may be differences between manufacturers.