SKF GEH 20 TXG3E-2LS spherical plain bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical plain bearings and rod ends
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF GEH 20 TXG3E-2LS is a reference of spherical plain bearing, within Bearings. Request a quote for GEH 20 TXG3E-2LS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF radial spherical plain bearing of the GEH TXG3E-2LS series is a spherical sliding bearing that allows oscillating movements and angular misalignment. It is used in applications with combined loads and a need for freedom of movement, such as hydraulic cylinders, suspension and steering mechanisms. MR Accesorios Industriales carries this brand and advises you on choosing the correct size for your equipment.
The GEH TXG3E-2LS designation reads as follows: GEH indicates a radial spherical plain bearing of the GEH series, with dimensions according to standard. The suffix TXG3E indicates the treatment and material of the inner ring, and -2LS means it has double contact seals on both sides. For example, the GEH 20 TXG3E-2LS has a bore diameter of 20 mm. Knowing these codes helps you order the exact replacement part.
These spherical plain bearings are used in industries such as metallurgy, automotive, agricultural machinery and earthmoving equipment. In Argentina you find them in hydraulic cylinders of excavators, in suspension arms, in steering systems and in road machinery. They are also used in presses and transmission equipment where oscillation under load is required.
To select the right spherical plain bearing, take into account the bore diameter, the type of load (radial, axial or combined) and the environmental conditions. The -2LS seal protects against dust and moisture, but if there is exposure to chemical agents or extreme temperatures, consult with us. Mounting must ensure alignment between the shafts and adequate lubrication; in sealed spherical plain bearings, the lubricant is retained from the factory.
SKF spherical plain bearings are interchangeable with those of other European brands that follow the same dimensional standards. When looking for a replacement, verify that the series code and the bore diameter match, and that the seal type is compatible with your application. Not all brands use the same nomenclature, so it is important to validate the actual dimensions before replacing.
If you need an SKF GEH TXG3E-2LS radial spherical plain bearing or its equivalent, send us the code or the dimensions via WhatsApp. At MR Accesorios Industriales we quote you and help you find the right part for your equipment.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the -2LS suffix in the designation mean?
- The -2LS suffix indicates that the spherical plain bearing has double contact seals, one on each side. This protects against the entry of dust, water and other contaminants, and helps retain the lubricant. It is a suitable configuration for environments with moderate dirt or moisture.
- How do I choose between a sealed and an open spherical plain bearing?
- The choice depends on the environment. If dust, water or particles are present, a sealed one such as the -2LS series is advisable. If the environment is clean and lower friction is required, an open one may be sufficient. Consult us and we will advise you according to your application.
- Are they interchangeable with other brands?
- Yes, as long as the dimensional standard and the series code match. SKF spherical plain bearings are usually interchangeable with other brands that follow the same specifications. Verify the bore diameter, the width and the seal type before replacing. If you have doubts, send us the dimensions and we will confirm.