Spherical plain bearing SKF GE 60 TXE-2LS

SKF GE 60 TXE-2LS is a spherical plain bearing reference, within Bearings. Request a quote for GE 60 TXE-2LS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SKF rod ends and spherical bearings of the GE TXE-2LS series are radial spherical plain bearings with a treated sliding surface and double seal. They are used to support combined loads and oscillating movements in industrial machinery, earthmoving equipment, cranes and hydraulic systems. Their design allows misalignment and slow rotation with reduced maintenance. MR Accesorios Industriales supplies this line as an official brand for the Argentine market.

The designation GE … TXE-2LS reads as follows: GE indicates a radial spherical plain bearing (rod end), the number that follows is the bore diameter in millimeters (for example, GE 20 TXE-2LS has a 20 mm bore). The suffix TXE indicates that the sliding surface is treated, and -2LS that it has a double lip seal on both sides. Examples in the series range from GE 20 TXE-2LS to GE 60 TXE-2LS, covering bore diameters from 20 to 60 mm.

These spherical bearings are used in industries such as metallurgy, cement, mining and agriculture. They are found in hydraulic cylinders, excavator arms, steering systems, chain tensioners, furnace doors and lifting equipment. In Argentina they are common in road machinery, combine harvesters and port cranes. Their ability to support combined radial and axial loads makes them suitable for articulation points with slow oscillating movements.

To select a GE TXE-2LS spherical bearing, take into account the radial and axial load it must support, the shaft diameter and the required misalignment angle. The -2LS seal protects against dust and moisture, but compatibility with the environment should be verified. During mounting, ensure correct alignment and avoid impacts that could damage the sliding surfaces. Initial lubrication is permanent; in severe applications, consider additional lubrication. Always check housing and shaft tolerances.

SKF GE TXE-2LS rod ends can be interchanged with equivalent products from other brands that follow the same dimensional designation, such as the GE..ES or GE..UK series. However, load capacities and materials may vary between manufacturers. Always verify the critical dimensions: bore, outside diameter and width. For replacements, compare the technical specifications and do not rely on the part number alone. A technical advisor can help you validate the equivalence.

If you need to replace an SKF GE TXE-2LS rod end or spherical bearing, send the exact part number via WhatsApp to MR Accesorios Industriales. We will quote the size shown on your equipment or drawing. We can also advise you on alternatives if the original part number is not available. Write to us and we will reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.