Product page
Spherical plain bearing SKF GE 20 ES/C2
- Manufacturer Part Number
- GE 20 ES/C2
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Spherical plain bearings and rod ends
Other brands in this family
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF GE 20 ES/C2 is a spherical plain bearing reference, within Bearings. Request a quote for GE 20 ES/C2 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
SKF radial spherical plain bearings of the GE ES/C series are spherical sliding bearings that support radial loads and allow oscillating and misalignment movements between shafts. They are used in hydraulic cylinders, steering systems and mechanisms where there is no continuous rotation. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct size and clearance.
The designation GE … ES/C… is read as follows: GE indicates radial spherical plain bearing; the number that follows is the bore diameter in millimeters; ES indicates it is a one-piece design with groove and lubrication holes in the inner ring; and C… defines the internal radial clearance, with standardized values. For example, GE 20 ES/C2 corresponds to a spherical plain bearing with a 20 mm bore and C2 internal clearance. Knowing these suffixes is key to ordering the correct replacement.
These spherical plain bearings are used in hydraulic and pneumatic cylinders, steering arms, suspension, road machinery, agricultural equipment and presses. In Argentina they are common in the metalworking, automotive, crane and forklift industries. They withstand radial loads combined with misalignment and work well under slow oscillation conditions. If the application requires continuous rotation, it is advisable to evaluate another type of bearing.
To select a GE ES/C spherical plain bearing, take into account radial load, oscillation angle and environmental conditions. Sealing is essential: if there is dust or moisture, choose versions with seals. Lubrication must be periodic with good quality grease, especially in the inner ring holes. Mounting is done with a slight interference fit in the housing and clearance on the shaft, respecting alignment so as not to force the spherical plain bearing.
SKF spherical plain bearings of the GE ES/C series are interchangeable with those of other brands that follow the same standardized designation, such as INA, NSK or NTN. Equivalence is based on bore diameter, width and clearance type. Always verify critical dimensions and sealing type before replacing. MR Accesorios Industriales can help you validate interchangeability according to your application.
If you need an SKF GE ES/C radial spherical plain bearing, send us the full code via WhatsApp. At MR Accesorios Industriales we quote and advise you so that the choice is correct. More than 80 years supporting Argentine industry with bearings and power transmission.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the suffix C2 mean in a GE ES spherical plain bearing?
- The suffix C2 indicates a reduced internal radial clearance, smaller than normal clearance. It is chosen when greater positioning precision is required or when loads are low and minimizing play is sought. Always verify the clearance recommended by the equipment manufacturer.
- How are GE ES/C spherical plain bearings lubricated?
- These spherical plain bearings have grooves and lubrication holes in the inner ring. They are lubricated with grease through a channel or grease fitting. Frequency depends on the application and environmental conditions. In dirty or humid environments, shorten lubrication intervals.
- Can I replace an SKF spherical plain bearing with another brand?
- Yes, if the standardized designation matches in bore diameter, width and clearance type. Brands such as INA, NSK or NTN manufacture equivalent spherical plain bearings. It is still advisable to verify dimensions and sealing. Consult us with the original code and we will help you find the equivalent.