SKF C 4022-2CS5V/C3GEM9 cARB roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- CARB roller bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF C 4022-2CS5V/C3GEM9
- C 40Series
- CARB roller bearings, C 40 series. For the same bore, each series has a different outside diameter and width.
- 22Bore
- 110 mm bore: 22 × 5.
- 2CS5V/C3GEM9Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
C 4022 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF C 4022-2CS5V/C3GEM9 bearing has a 110 mm bore, a 170 mm outside diameter and a 60 mm width (110 x 170 x 60 mm).
SKF C 4022-2CS5V/C3GEM9 is a reference of cARB roller bearing, within Bearings. Request a quote for C 4022-2CS5V/C3GEM9 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF CARB bearing is a self-aligning toroidal roller bearing designed to support dynamic misalignment and combined loads. Its compact design and ability to adapt to shaft deflection make it ideal for applications where precise alignment is not guaranteed. At MR Accesorios Industriales we sell products so you can solve your assemblies with confidence.
The designation of the CARB series is read in blocks: the letter C indicates the CARB family; the first number (for example, 40) indicates the dimension series; the following digits (22) correspond to the size code. The suffixes provide key information: 2CS indicates double contact seal, V designates the cage and material variant, and C3 specifies an internal radial clearance greater than normal. For example, C 4022-2CS5V/C3GEM9 combines sealing, cage and special clearance. Understanding these suffixes allows you to choose the exact variant for your application.
These bearings are used in industries such as food, cement, mining and chemical processing, where shafts undergo deflection or misalignment. In Argentina, they are common in conveyors, mixers, slurry pumps and grinding equipment. Their self-aligning ability reduces wear and extends the service life of the assembly, even in severe conditions with dust or humidity. MR Accesorios Industriales sells them to serve these demanding applications.
To select a CARB, consider the radial and axial load, the rotation speed and the environment. The 2CS seal protects against contaminants and retains lubricant; if the environment is clean, an open variant may be sufficient. C3 clearance is recommended when there are thermal gradients or interference fits. During mounting, ensure adequate initial alignment and correct lubrication; the bearing's self-alignment compensates for deviations, but does not replace good mounting.
SKF CARB bearings can be interchanged with bearings from other brands that follow the same dimensional and suffix designation, such as equivalent series from European or Asian manufacturers. However, always verify tolerances and radial clearance, as they may vary between manufacturers. Interchangeability is possible if dimensions and operating conditions are respected. Contact us for equivalences if you have doubts.
If you need a CARB bearing for your equipment, send us the complete code by WhatsApp. At MR Accesorios Industriales we advise you so you choose the correct variant for your application. Request a quote with no obligation and receive personalized technical support.
Dimensions
Boundary dimensions of the basic designation C 4022 per ISO 15: 110 x 170 x 60 mm (d x D x B).
- Bore
- 110mm
- Outside diameter (D)
- 170mm
- Width (B)
- 60mm
Frequently Asked Questions
- What are the dimensions of the SKF C 4022-2CS5V/C3GEM9 bearing?
- The SKF C 4022-2CS5V/C3GEM9 bearing has a 110 mm bore, a 170 mm outside diameter and a 60 mm width (110 x 170 x 60 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation C 4022.
- What does the suffix 2CS mean in a CARB bearing?
- The suffix 2CS indicates that the bearing has double contact seal, which protects against the entry of contaminants and lubricant loss. It is ideal for dirty or humid environments.
- Can I replace a CARB bearing with one from another brand?
- Yes, if the main dimensions and radial clearance match. Always verify tolerances and contact us for equivalences to ensure correct operation.
- How do I choose between a sealed and an open CARB?
- If the environment has dust, humidity or particles, choose the sealed version. In clean environments with controlled lubrication, an open bearing may be sufficient and more economical.