Radial shaft seal SKF 85X105X10 CRW1 V

SKF 85X105X10 CRW1 V is a radial shaft seal reference, within Seals. Request a quote for 85X105X10 CRW1 V via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SKF CRW1 V series radial shaft seals are single-lip spring-loaded seals designed to retain lubricant and exclude contaminants on rotating shafts. They are identified by their designation, which combines dimensions and construction features, and they are used in a wide variety of industrial equipment. MR Accesorios Industriales supplies this line as an official brand, with technical advice to choose the right seal for the application.

The designation of these seals follows a compact format: for example, 12X32X7 CRW1 V indicates a bore diameter of 12 mm, an outside diameter of 32 mm and a width of 7 mm. The CRW1 suffix identifies the lip design and body material, while the final V indicates the presence of a secondary exclusion lip. Thus, 17X28X7 CRW1 V or 20X35X7 CRW1 V follow the same logic: first the dimensions and then the letters that define the construction. Knowing this structure allows you to interpret any part number in the series.

These seals are used in pumps, electric motors, gear reducers, transmission boxes and process equipment. In Argentine industry they appear in food, chemical and petrochemical plants and in the metalworking sector, where protection against dust, water or chips is critical. They are also found in agricultural machinery and material handling equipment. Their function is twofold: to prevent oil or grease leaks and to block the entry of particles that accelerate wear on bearings and shafts.

To select the correct seal, verify the shaft diameter, the housing and the available width. The lip must run on a ground and lubricated surface; a worn or scratched track causes premature leaks. Alignment between shaft and housing is essential: misalignments greater than permissible shorten seal life. During mounting, lubricate the lip with the same oil as the equipment, avoid impacts and make sure the spring is correctly seated. If the environment is very dusty, consider variants with an additional exclusion lip.

SKF seals are interchangeable with those from other manufacturers that follow the same standardized dimensions. When replacing, compare not only the dimensions but also the lip type, material and service temperature. A seal with an exclusion lip can replace a simple one if space allows, but not the other way around. For applications with high peripheral speeds or extreme temperatures, consult the compound limitations. MR Accesorios Industriales can guide you on the right equivalent without compromising performance.

If you need an SKF CRW1 V series radial shaft seal, send us the complete part number on WhatsApp. With the shaft and housing data, we will quote the exact reference and advise you on installation. MR Accesorios Industriales has more than 80 years supporting Argentine industry with power transmission and sealing components.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.