Product page
Angular contact ball bearing SKF 7465
- Manufacturer Part Number
- 7465
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
Other brands in this family
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF 7465 is a angular contact ball bearing reference, within Bearings. Request a quote for 7465 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The angular contact bearing has the raceways of the inner and outer rings offset from each other, which gives it a contact angle that allows it to support axial load in one direction in addition to radial load. It is used when the axial load is more important than in a common deep groove ball bearing, but higher speed is needed than a tapered roller provides.
The designation starts with the series number (72, 73, 74 depending on the contact angle and proportions) followed by the coded diameter, and usually ends with a letter suffix that indicates the exact contact angle and whether it is supplied individually or prepared for pair mounting, with letters such as DB, DF or DT depending on the arrangement.
It is mounted in machine tool spindles, high-speed pumps, motors with axial thrust and generally in shafts that rotate fast and receive load in a defined direction, such as the thrust of a belt or a helical gear. Due to its geometry, it tolerates higher speeds than a tapered roller of comparable axial load capacity.
Since it supports axial load in one direction, it is almost always mounted opposed to another identical bearing —in DB or DF pairs— to cover thrust in both directions. The preload between the pair, if specified by the manufacturer, must be respected: it defines the stiffness and service life of the assembly.
Among manufacturers, the 72, 73 and 74 series with their contact angle is fairly standardized by size, although precision and pair mounting variants change nomenclature from one brand to another. It is advisable to confirm the complete code, not just the series number, to ensure the correct equivalent.
If you have the complete bearing code —series, size and mounting suffix— write to us via WhatsApp and we will confirm the equivalent. MR Accesorios Industriales provides quotes for SKF angular contact bearings by manufacturer's part number.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the contact angle mean in these bearings?
- It is the angle between the line of force transmitted by the balls and the radial plane of the bearing. The larger the angle, the greater the axial load capacity in that direction, at the cost of some maximum speed.
- Why are they mounted in pairs?
- Because they support axial thrust in one direction. Mounted in opposed pairs, they cover thrust in both directions and provide greater stiffness to the assembly.
- Is there a difference between DB and DF arrangements?
- Yes, the orientation of the raceways changes: DB (back-to-back) provides greater angular stiffness, DF (face-to-face) is more tolerant of shaft misalignment. It depends on the application.