SKF 7315 BEM1/S0VQ335 angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 7315 BEM1/S0VQ335
- 73Series
- Angular contact ball bearings, 73 series. For the same bore, each series has a different outside diameter and width.
- 15Bore
- 75 mm bore: 15 × 5.
- BEM1/S0VQ335Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
7315 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 7315 BEM1/S0VQ335 bearing has a 75 mm bore, a 160 mm outside diameter and a 37 mm width (75 x 160 x 37 mm).
SKF 7315 BEM1/S0VQ335 is a reference of angular contact ball bearing, within Bearings. Request a quote for 7315 BEM1/S0VQ335 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF angular contact bearings are a robust solution for shafts that combine radial and axial loads. Their design with offset raceways allows oblique contact between balls and raceways, providing high load capacity and rigidity. They are used in applications requiring precision and reliability, such as pumps, compressors, gearboxes and spindles. At MR Accesorios Industriales we carry this line and help you choose the correct part number for your equipment.
The designation of these bearings follows a scheme that combines letters and numbers. For example, in 7315 BEM1/S0VQ335, the numeric prefix indicates the size and dimensional series; the letter B indicates a 40° contact angle, while EM refers to the machined brass cage. The suffix /S0 indicates a special internal clearance, and VQ335 a particular precision or temperature specification. Knowing these codes is key to ordering the exact replacement.
In Argentine industry, these bearings are used in pumping equipment, induced draft fans, gearboxes and machine tool spindles. They are also present in automotive and railway applications. Their ability to withstand combined loads makes them ideal for assemblies where the shaft must remain aligned with high rigidity. MR Accesorios Industriales supplies various productive sectors, from petrochemical plants to maintenance workshops.
To select correctly, take into account the direction of the axial load, the rotation speed and the environmental conditions. Sealing or shield plates must be chosen according to contamination and the need for lubricant retention. Internal clearance and preload affect rigidity and service life; mounting with improper fit can cause premature failures. Proper lubrication and precise alignment between shaft and housing are essential for optimal performance.
There are cross-brand equivalents for this type of bearing, but they are not always directly interchangeable. Factors such as contact angle, cage and internal clearance can vary between manufacturers. Therefore, when looking for a replacement, it is essential to verify that the full part number matches in dimensions and specifications. If you have doubts, our technical team can help you interpret the differences and find the right option for your application.
If you need an SKF angular contact bearing, send us the full part number via WhatsApp. At MR Accesorios Industriales we advise you so you receive the correct product according to your equipment's requirements. Request a quote with no obligation and take advantage of our experience in bearings and power transmission.
Dimensions
Boundary dimensions of the basic designation 7315 per ISO 15: 75 x 160 x 37 mm (d x D x B).
- Bore
- 75mm
- Outside diameter (D)
- 160mm
- Width (B)
- 37mm
The same size in other brands
Pages from other brands with the basic designation 7315: 75 x 160 x 37 mm (d x D x B) per ISO 15.
- FAG7315-B-XL-JP7315-B-XL-TVP
- NSK7315 A7315 BEA
- NTN73157315B
- RKB7315
- TIMKEN7315 B
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 7315 BEM1/S0VQ335 bearing?
- The SKF 7315 BEM1/S0VQ335 bearing has a 75 mm bore, a 160 mm outside diameter and a 37 mm width (75 x 160 x 37 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 7315.
- What does the BEM1 suffix mean on an SKF bearing?
- The suffix BEM1 indicates design characteristics: the letter B indicates a 40° contact angle, EM a machined brass cage, and 1 an internal design variant. These details influence load capacity and limiting speed, so it is important to respect the original part number when replacing.
- How do I choose between an angular contact bearing and a deep groove ball bearing?
- The angular contact bearing supports axial loads in one direction and requires mounting in pairs for combined loads. The deep groove ball bearing accepts moderate radial and axial loads in both directions. If your application has significant axial load, the angular contact bearing is the recommended option.
- Can I replace an SKF with another brand without problems?
- In general, yes, but you must verify that the equivalent part number matches in dimensions, contact angle, cage and internal clearance. Not all brands use the same nomenclature. Consult us with the original part number and we will indicate the compatible alternative.