Angular contact ball bearing SKF 7302 BE-2RZP

SKF 7302 BE-2RZP is a angular contact ball bearing reference, within Bearings. Request a quote for 7302 BE-2RZP via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The BE-2RZP is an SKF angular contact bearing with two low-friction seals. It is used in applications with combined radial and axial loads where efficient sealing is required to retain lubricant and block contaminants. It is a common solution in pumps, electric motors, gearboxes and transmission equipment. At MR Accesorios Industriales we carry it as part of our SKF bearing line.

The designation BE-2RZP is read as follows: the series is identified by the basic four-digit number, where the first two indicate the bearing type and the last two the bore diameter. For example, 7202 and 7204 correspond to the 72 series, single row angular contact, with different bore sizes. The suffix BE defines the optimized internal design, with higher load capacity and a contact angle that favors supporting axial loads in one direction. The suffix 2RZP indicates that the bearing has two low-friction seals, one on each side, which protect against the entry of dust and moisture, and retain the grease for life. This combination makes it suitable for environments with moderate contamination.

These bearings are used in equipment where axial and radial loads act simultaneously. They are common in centrifugal pumps, electric motors, fans, gearboxes and machine tools. In Argentina, you will find them in the food, chemical, petrochemical and water treatment industries, among others. Their double sealing makes them suitable for places where frequent maintenance cannot be performed or where dust or moisture is present. They are also used in power transmission applications, such as gearboxes and conveyor systems.

To select the correct bearing, take into account the axial load it will withstand, its direction and the rotation speed. The 2RZP seal is already factory-lubricated, so it does not need relubrication. It is important to mount it with the seal facing the side to be protected and to ensure correct alignment between the shaft and the housing to avoid additional stresses. If the bearing works in only one direction of axial load, it can be mounted in pairs to support loads in both directions. Cleanliness of the seat and the use of suitable tools are key to avoid damaging the seals during assembly.

When looking for a replacement, it is common to find equivalences between brands. Each manufacturer has its own suffixes to indicate sealing, internal clearance or precision. In the case of angular contact bearings with seals, it is important to verify that the other brand's code includes the same characteristics: double sealing, optimized internal design and dimensions. Not all suffixes mean the same thing, so it is advisable to compare technical specifications and not just the basic number. If you have any doubts, contact us and we will help you find the correct equivalent.

If you need this bearing, send us the full code via WhatsApp. At MR Accesorios Industriales we advise you so you choose the option that best suits your equipment. We can guide you on interchangeability with other references. Do not hesitate to write to us.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.