SKF 7213 ACCBM angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 7213 ACCBM
- 72Series
- Angular contact ball bearings, 72 series. For the same bore, each series has a different outside diameter and width.
- 13Bore
- 65 mm bore: 13 × 5.
- ACCBMSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
7213 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 7213 ACCBM bearing has a 65 mm bore, a 120 mm outside diameter and a 23 mm width (65 x 120 x 23 mm).
SKF 7213 ACCBM is a reference of angular contact ball bearing, within Bearings. Request a quote for 7213 ACCBM via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF angular contact bearings with the ACCBM suffix are single row bearings with a contact angle, designed to support combined radial and axial loads. They are used in applications where high precision and rigidity are required, such as machine tool spindles, pumps and gearboxes. At MR Accesorios Industriales we sell this SKF line, with technical advice to select the right bearing for your application.
The designation of these bearings follows the SKF system: the basic number indicates the size and series, while the suffixes provide information about the internal design and special characteristics. In the case of AC CBM, the letters and final letters indicate particularities such as the contact angle, the machined brass cage and other execution variants. For example, in 7213 ACCBM and 7311 ACCBM, the numeric prefix identifies dimensions and load capacity, while the ACCBM suffix specifies the design with angular contact and brass cage. Knowing these codes is key to ordering the correct replacement.
These bearings are used in industries that require precise and reliable power transmission. In Argentina, they are common in machine tool spindles, centrifugal pumps, compressors, gearboxes and gear cases. They are also found in mining equipment, cement plants and steel plants, where combined loads and high speeds demand robust bearings. Their ability to support axial loads in one direction makes them ideal for applications with constant thrust, such as screw pumps or industrial fans.
To select an angular contact bearing, take into account the magnitude and direction of the loads, the rotation speed and the environmental conditions. It is essential to verify the internal clearance and sealing: these bearings are usually mounted in pairs to counteract axial loads in both directions. Lubrication must be adequate, whether grease or oil, and the alignment between shaft and housing must be precise to avoid additional stresses. Incorrect mounting can reduce service life; therefore, follow the manufacturer's recommendations and use appropriate mounting tools.
As for equivalences, SKF angular contact bearings can be interchanged with those of other brands that follow the same dimensional and suffix designation, such as FAG, NSK or NTN. However, tolerances and internal design may vary, so it is always advisable to verify compatibility before replacing. If you need to replace an existing bearing, we can help you identify the equivalent reference.
To request a quote for the bearing you need, simply send us the complete code on WhatsApp. At MR Accesorios Industriales we advise you so you find the right part. Our technical team is here to help you keep your equipment running.
Dimensions
Boundary dimensions of the basic designation 7213 per ISO 15: 65 x 120 x 23 mm (d x D x B).
- Bore
- 65mm
- Outside diameter (D)
- 120mm
- Width (B)
- 23mm
The same size in other brands
Pages from other brands with the basic designation 7213: 65 x 120 x 23 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 7213 ACCBM bearing?
- The SKF 7213 ACCBM bearing has a 65 mm bore, a 120 mm outside diameter and a 23 mm width (65 x 120 x 23 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 7213.
- What does the ACCBM suffix mean on an SKF bearing?
- The ACCBM suffix indicates specific design characteristics, such as the contact angle, the cage type (machined brass) and other variants. It is important to respect the suffix when replacing the bearing to ensure performance.
- Can I replace an SKF ACCBM bearing with one from another brand?
- Yes, as long as the dimensional designation and suffixes match. Brands such as FAG, NSK or NTN offer equivalents, but verify tolerances and internal design. Contact us and we will help you find the best option.
- How should I mount an angular contact bearing?
- It is recommended to mount them in pairs, with adequate preload, and to ensure precise alignment. Lubrication must be the indicated one and mounting must be done with suitable tools to avoid damage. Follow the manufacturer's instructions for optimal performance.