SKF 6319-2RS1/C3GEN4 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6319-2RS1/C3GEN4
- 63Series
- Deep groove ball bearings, 63 series. For the same bore, each series has a different outside diameter and width.
- 19Bore
- 95 mm bore: 19 × 5.
- 2RS1/C3GEN4Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6319 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6319-2RS1/C3GEN4 bearing has a 95 mm bore, a 200 mm outside diameter and a 45 mm width (95 x 200 x 45 mm).
SKF 6319-2RS1/C3GEN4 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6319-2RS1/C3GEN4 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing of the RS/C GEN series is a precision component designed to withstand moderate radial and axial loads in both directions. Its sealed construction protects it against contamination and retains the lubricant, making it ideal for industrial equipment operating in demanding environments. MR Accesorios Industriales supplies this line as a brand, with technical advice to select the right variant for your application.
The designation of this series combines several indicators. The suffix RS indicates that the bearing incorporates elastomer seals on both sides, ensuring effective closure against dust and moisture. The letter C followed by a number indicates the internal clearance class, which can be standard or increased according to thermal expansion needs. The code GEN identifies a general execution variant. For example, the reference 6319-2RS1/C3GEN4 corresponds to a bearing from the 63 series, with double-sided seals, C3 clearance and GEN4 execution. Knowing these suffixes allows you to correctly interpret the full part number.
This type of bearing is used in a wide variety of industrial applications in Argentina. It is commonly found in electric motors, centrifugal pumps, fans, conveyors and machine tools. Its ability to withstand combined loads and its low maintenance make it suitable for food plants, cement plants, steel mills and mining facilities. The sealed version is especially useful in environments with dust, chips or liquids, where an additional barrier is required to protect the rolling elements and extend the service life of the component.
When selecting a bearing from this series, take into account the type of sealing, internal clearance and lubrication conditions. The RS seal offers superior protection compared to metal shields, but can slightly increase friction torque. C3 or C4 clearance is recommended when thermal expansion is expected due to temperature differences between the shaft and the housing. For mounting, make sure to correctly align the supports and apply the appropriate fitting load, avoiding impacts that could damage the seals or raceways. Correct lubrication and clean mounting are key to achieving the calculated service life.
Regarding equivalents and interchangeability, deep groove ball bearings from different brands usually follow standardized designations, but there may be differences in suffixes and tolerances. Therefore, it is always advisable to verify the critical dimensions and operating conditions before replacing one bearing with another from a different manufacturer. MR Accesorios Industriales supplies SKF as a brand and can advise you on compatibility with other brands, without the need to resort to invented codes. Interchangeability is given by standardized dimensions, but performance may vary depending on the quality of materials and the manufacturing process.
If you need to request a quote for this bearing or ask about a specific application, send us the full part number by WhatsApp. At MR Accesorios Industriales we respond with the technical information you need to make the best decision. We have a team prepared to help you select the right bearing for your equipment. Do not hesitate to write to us: your inquiry is welcome and allows us to offer you a tailored solution.
Dimensions
Boundary dimensions of the basic designation 6319 per ISO 15: 95 x 200 x 45 mm (d x D x B).
- Bore
- 95mm
- Outside diameter (D)
- 200mm
- Width (B)
- 45mm
The same size in other brands
Pages from other brands with the basic designation 6319: 95 x 200 x 45 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6319-2RS1/C3GEN4 bearing?
- The SKF 6319-2RS1/C3GEN4 bearing has a 95 mm bore, a 200 mm outside diameter and a 45 mm width (95 x 200 x 45 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6319.
- What does the RS suffix mean on an SKF bearing?
- The RS suffix indicates that the bearing has elastomer seals on both sides. These seals protect against the entry of contaminants and retain the lubricant, which extends service life in dirty or humid environments. It is a common option for demanding industrial applications.
- When is it better to choose a C3 internal clearance instead of the standard one?
- C3 clearance is recommended when the bearing will operate at high temperatures or with thermal differences between the shaft and the housing, as it allows expansion without compromising operation. Also in applications with interference fits or high speeds. Consult us about your particular case.
- How do I know if a bearing from another brand is equivalent to the SKF one I need?
- Equivalence is based on standardized dimensions and the type of execution. Verify the bore, outer diameter and width, as well as the sealing and clearance suffixes. At MR we advise you to find the compatible option without risks. Send us the part number by WhatsApp.