SKF 6316/HC5C3S0 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6316/HC5C3S0
- 63Series
- Deep groove ball bearings, 63 series. For the same bore, each series has a different outside diameter and width.
- 16Bore
- 80 mm bore: 16 × 5.
- HC5C3S0Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6316 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6316/HC5C3S0 bearing has a 80 mm bore, a 170 mm outside diameter and a 39 mm width (80 x 170 x 39 mm).
SKF 6316/HC5C3S0 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6316/HC5C3S0 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing is an essential industrial component for supporting radial and axial loads. Its single row of balls and deep raceways design allows high speeds and long service life. MR Accesorios Industriales supplies this brand, with quality and technical support for your equipment.
The designation of this series is interpreted according to the suffixes that accompany the base part number. For example, in 6316/HC5C3S0, the numeric prefix indicates the size and dimensional series, while HC5 indicates high-strength ceramic balls, C3 establishes a greater than standard radial clearance and S0 refers to a special heat treatment for dimensional stability. These part numbers allow the bearing to be adapted to specific operating conditions.
These bearings are used in a wide variety of industries in Argentina, such as food, petrochemical, steel and mining. They are found in pumps, fans, electric motors, conveyor belts and precision machinery. Their ability to support combined loads and operate at high speeds makes them versatile for rotating equipment in production plants.
To select correctly, consider load, speed and environmental conditions. Proper sealing prevents contamination and lubricant loss; radial clearance should be chosen according to temperature and fit; lubrication can be grease or oil, and alignment between supports is critical to avoid additional stresses. Mounting with suitable tools extends service life.
Regarding equivalents, deep groove ball bearings from different brands can be interchanged if dimensions and tolerances match, but it is essential to verify the suffixes, as they indicate special features such as internal clearance or cage type. Not all part numbers are directly replaceable; always check the technical specifications.
To receive an accurate quote, send the full bearing part number by WhatsApp to MR Accesorios Industriales. Our technical team will advise you on the best option for your application, considering operating conditions and mounting requirements.
Dimensions
Boundary dimensions of the basic designation 6316 per ISO 15: 80 x 170 x 39 mm (d x D x B).
- Bore
- 80mm
- Outside diameter (D)
- 170mm
- Width (B)
- 39mm
The same size in other brands
Pages from other brands with the basic designation 6316: 80 x 170 x 39 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6316/HC5C3S0 bearing?
- The SKF 6316/HC5C3S0 bearing has a 80 mm bore, a 170 mm outside diameter and a 39 mm width (80 x 170 x 39 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6316.
- What does the HC5 suffix mean in the designation?
- The HC5 suffix indicates that the bearing incorporates ceramic balls (silicon nitride) instead of steel, which reduces weight, increases permissible speed and improves resistance to corrosion and high temperatures.
- What is the difference between C3 clearance and standard?
- C3 radial clearance is greater than standard, which compensates for thermal expansion and improves operation in applications with high temperatures or interference fits. Choose the clearance according to operating conditions.
- How do I know if I can replace a bearing from another brand with this SKF one?
- You must compare the main dimensions (bore, outer diameter and width) and verify that the suffixes match in features such as clearance, cage and sealing. If in doubt, contact us with the original part number and we will advise you.