SKF 6310 M/C4HVA3091 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6310 M/C4HVA3091
- 63Series
- Deep groove ball bearings, 63 series. For the same bore, each series has a different outside diameter and width.
- 10Bore
- 50 mm bore: 10 × 5.
- M/C4HVA3091Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6310 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6310 M/C4HVA3091 bearing has a 50 mm bore, a 110 mm outside diameter and a 27 mm width (50 x 110 x 27 mm).
SKF 6310 M/C4HVA3091 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6310 M/C4HVA3091 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing is an essential component for supporting radial and axial loads in industrial applications. Its single-row ball design and steel cage allow high speeds and smooth operation. It is used in electric motors, pumps, fans and general machinery. At MR Accesorios Industriales we carry this brand so your equipment operates reliably.
The designation of this series combines letters and numbers that indicate key characteristics. For example, in 6310 M/C4HVA3091, the numeric prefix indicates the size and dimension series. The letter M indicates a machined brass cage, suitable for high speeds and temperatures. The suffix C4 defines a radial internal clearance greater than standard, and HVA refers to a special stabilization and lubrication treatment for specific conditions. Knowing these codes allows you to choose the right bearing for your application.
These bearings are used in a wide variety of industries in Argentina. You'll find them in electric motors for pumps and compressors, in industrial fans, in machine tools and in power transmission equipment. They are also present in the food, chemical and petrochemical industries, where reliability is critical. Their ability to support combined loads makes them versatile for numerous production processes.
To select the correct bearing, take into account the load, speed and environmental conditions. Seals or shields prevent contamination, while the internal radial clearance must be suitable for the operating temperature. Proper lubrication and precise alignment during mounting are essential to extend service life. If you need technical assistance, at MR Accesorios Industriales we can guide you.
There are cross-brand equivalents for this type of bearing, but it is important to verify tolerances and radial clearance, as they can vary between manufacturers. Whenever possible, replace with a bearing with the same or higher specifications. Interchangeability depends on dimensions and load capacity, not just the code. Ask us if you have doubts about compatibility.
To receive an accurate quote, send us the complete part number of the bearing you need via WhatsApp. Our technical team will respond shortly with the available options. We work with SKF and other brands to offer you reliable solutions. Don't hesitate to contact us for personalized advice.
Other SKF versions of the 6310 series
These versions of the 6310 series appear in SKF catalogues and do not have their own page on this site. Ask us about any of them with the part number: we will source it and send you a quote.
- SKF 6310 N
Dimensions
Boundary dimensions of the basic designation 6310 per ISO 15: 50 x 110 x 27 mm (d x D x B).
- Bore
- 50mm
- Outside diameter (D)
- 110mm
- Width (B)
- 27mm
The same size in other brands
Pages from other brands with the basic designation 6310: 50 x 110 x 27 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6310 M/C4HVA3091 bearing?
- The SKF 6310 M/C4HVA3091 bearing has a 50 mm bore, a 110 mm outside diameter and a 27 mm width (50 x 110 x 27 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6310.
- What does the C4 suffix mean in the designation?
- The C4 suffix indicates a radial internal clearance greater than standard. This is useful in applications where operating temperatures are high or where greater tolerance is required to compensate for thermal expansion. It is important to verify that the clearance is suitable for your equipment.
- Does this bearing come with seals or shields?
- The designation provided does not specify seals or shields. For applications with contamination, we recommend asking about variants with seals or shields. Our team can advise you on the best option for your working environment.
- How do I know if this bearing is compatible with my machine?
- You should verify the main dimensions, the type of load and the operating speed. The complete part number of the original bearing is the best reference. If you send it to us via WhatsApp, we can help you find the right replacement.