SKF 6309-2Z/C3LHT23 deep groove ball bearing

SKF 6309-2Z/C3LHT23 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6309-2Z/C3LHT23 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF deep groove ball bearings with 2Z/C3LHT suffixes are components designed to support radial and axial loads in applications requiring protection against contaminants and high temperatures. Their construction includes two steel shields (2Z) that retain lubricant and block particles, while C3 internal clearance and high-temperature lubricant (LHT) allow stable operation in demanding environments. They are ideal for electric motors, fans and industrial equipment operating under severe conditions.

The designation of these bearings is interpreted as follows: the base number (for example, 6003, 6205, 6302) indicates the size and dimension series. The 2Z suffix indicates that the bearing has two metal shields, one on each side. The C3 designation corresponds to a radial internal clearance greater than standard, which compensates for thermal expansion and reduces the risk of seizure. Finally, LHT23 or LHT55 identifies the type of high-temperature lubricant with which it is pre-lubricated from the factory. Thus, a 6206-2Z/C3LHT23 is a bearing from the 62 series, with double shields, C3 clearance and high-temperature grease.

These bearings are used in a wide variety of industrial applications in Argentina. They are common in low- and medium-power electric motors, fans and extractors, centrifugal pumps, compressors, conveyor belts and agricultural machinery. They are also found in refrigeration equipment and transmission systems where operating temperatures exceed 100 °C. Their ability to support combined loads and their protection against dust and moisture make them suitable for environments with contaminants, as long as mounting and lubrication conditions are respected.

To correctly select a 2Z/C3LHT bearing, it is essential to consider radial and axial load, rotational speed and working temperature. C3 clearance is recommended when thermal differences between the inner and outer rings are expected, or when greater mounting tolerance is required. 2Z shields offer effective protection against solid particles, but they are not liquid-tight; if there is exposure to water or vapors, contact seals should be evaluated. LHT lubrication is formulated for high temperatures, so relubrication is not necessary in most cases. During mounting, ensure correct alignment and avoid impacts that could damage the raceways.

As for equivalents and interchangeability, SKF bearings in this series can be replaced by products from other brands that follow the same international designation. However, it is important to verify that the LHT suffix corresponds to a lubricant with a similar temperature range and that C3 clearance is maintained. Not all manufacturers offer exactly the same performance, so it is always advisable to consult the technical specifications before substituting. At MR Accesorios Industriales we sell SKF and can advise you on the best option for your application.

If you need a quote for an SKF deep groove ball bearing with these characteristics, send us the full part number via WhatsApp. At MR Accesorios Industriales we help you identify the right replacement and resolve any questions about mounting or lubrication. Write to us and we will reply promptly.