SKF 6302-ZTN9/C3VM036 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6302-ZTN9/C3VM036
- 63Series
- Deep groove ball bearings, 63 series. For the same bore, each series has a different outside diameter and width.
- 02Bore
- 15 mm bore: code 02 stands for 15 mm by standard.
- ZTN9/C3VM036Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6302 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6302-ZTN9/C3VM036 bearing has a 15 mm bore, a 42 mm outside diameter and a 13 mm width (15 x 42 x 13 mm).
SKF 6302-ZTN9/C3VM036 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6302-ZTN9/C3VM036 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing is an essential component for supporting radial and axial loads in rotating machinery. Its single-row ball design and deep raceways allow high speeds and low maintenance. At MR Accesorios Industriales we supply this brand with the technical support your application needs. Ideal for motors, pumps and transmissions.
The designation of these SKF bearings is interpreted from the series and suffixes. For example, 6001-ZTN9/C3VM036 and 6302-ZTN9/C3VM036 combine the size code with special indications. The suffix ZTN9 usually indicates a polyamide cage reinforced with fiberglass, while C3 indicates an internal radial clearance greater than standard. The extension VM036 specifies a particular lubrication or treatment variant. Knowing these codes is key to choosing the correct bearing.
These bearings are used in a wide variety of industries in Argentina. You will find them in electric motors, centrifugal pumps, fans, compressors and machine tools. Also in power transmission equipment and transport systems. Their ability to support combined loads and rotate at high speeds makes them versatile. In food, textile or metallurgical plants, they are a reliable option for small and medium diameter shafts.
To select the right bearing, take into account the load, speed and environmental conditions. The C3 internal clearance is useful when there are thermal differences between the shaft and the housing. The ZTN9 cage offers good strength and low weight. During mounting, ensure correct alignment and adequate lubrication according to the application. If the environment has dust or moisture, consider additional seals. Cleaning the support surfaces prevents premature failures.
Deep groove ball bearings are interchangeable between manufacturers if dimensions and tolerances match. The SKF designation may have equivalents in other brands, but proprietary suffixes such as ZTN9 or VM036 are not always available. When replacing, verify the internal clearance, cage type and lubrication. At MR Accesorios Industriales we can guide you on compatible alternatives. Consult us with the exact designation and we will advise you.
To request a quote for this SKF bearing, send us the complete code via WhatsApp. We respond with the technical information you need for your equipment. Write to us and we will help you find the right solution for your application.
Dimensions
Boundary dimensions of the basic designation 6302 per ISO 15: 15 x 42 x 13 mm (d x D x B).
- Bore
- 15mm
- Outside diameter (D)
- 42mm
- Width (B)
- 13mm
The same size in other brands
Pages from other brands with the basic designation 6302: 15 x 42 x 13 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6302-ZTN9/C3VM036 bearing?
- The SKF 6302-ZTN9/C3VM036 bearing has a 15 mm bore, a 42 mm outside diameter and a 13 mm width (15 x 42 x 13 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6302.
- What does the suffix ZTN9 mean on an SKF bearing?
- The suffix ZTN9 indicates a polyamide cage reinforced with fiberglass, suitable for high speeds and moderate temperatures. It is an SKF proprietary designation that may vary in other manufacturers.
- When is it advisable to use a bearing with C3 clearance?
- C3 radial clearance is greater than standard and is recommended when there are thermal gradients between the shaft and the housing, or when high speeds are required. It helps compensate for expansion and avoid excessive preload.
- How do I request a quote for SKF bearings at MR?
- Send the complete bearing code via WhatsApp to MR Accesorios Industriales. We will respond with the quote and alternatives if necessary. We can also advise you on installation and maintenance.