Radial shaft seal SKF 62X120X12 HMS5 V

SKF 62X120X12 HMS5 V is a radial shaft seal reference, within Seals. Request a quote for 62X120X12 HMS5 V via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SKF radial shaft seals of the HMS5 V series are single-lip seals with a spring, designed for rotating shafts. Their function is to retain lubricant and exclude contaminants in gearboxes, pumps, electric motors and speed reducers. The HMS5 V designation indicates a lip profile with spring and an outer elastomer body, suitable for unmachined housings. MR Accesorios Industriales offers this line as an official brand for the Argentine market.

The designation of these seals combines dimensions and suffixes. For example, 12X28X7 HMS5 V indicates an inner diameter of 12 mm, an outer diameter of 28 mm and a width of 7 mm. The suffix HMS5 identifies the series with sealing lip and spring, while the final V indicates a construction variant, normally linked to the type of elastomer or the lip design. Other examples such as 20X35X7 HMS4 V show that the number after HMS can vary, indicating differences in the profile or in the lip material. It is always advisable to verify the full part number on the seal's metal case or on the equipment drawing.

These seals are used in a wide variety of industrial applications in Argentina: speed reducers, centrifugal pumps, electric motors, gearboxes, transmission shafts and process equipment. They are also present in the food, chemical, petrochemical and agricultural machinery industries, where reliable sealing prevents oil leaks and the entry of dust or water. Their spring-loaded lip design ensures uniform contact on the shaft, even with slight eccentricities or misalignments.

To correctly select a radial shaft seal, you must consider shaft speed, operating temperature, lubricant type and differential pressure. Installation requires cleaning the housing and shaft, lubricating the lip with the same oil or grease used in service, and inserting the seal perpendicularly so as not to damage the lip. It is essential to verify alignment between shaft and housing, and to avoid impacts during installation. If the shaft is worn, it may be necessary to use a wear sleeve or change the seal position.

Regarding equivalents and interchangeability, SKF HMS5 V series seals can be replaced by products from other manufacturers that meet the same dimensions and material and lip specifications. You should not assume that a similar part number from another brand is identical; you must compare diameters, width, elastomer type and temperature range. MR Accesorios Industriales offers SKF as an official brand, and can advise you to find the right alternative for your application.

If you need to request a quote for SKF HMS5 V radial shaft seals, send the full part number via WhatsApp to MR Accesorios Industriales. We have more than 80 years of experience in industrial distribution and can help you identify the right seal for your equipment. Write to us and we will reply promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.