SKF 625-2RS1/C3MLHT23 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 625-2RS1/C3MLHT23
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 5Bore
- 5 mm bore.
- 2RS1/C3MLHT23Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
625 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 625-2RS1/C3MLHT23 bearing has a 5 mm bore, a 16 mm outside diameter and a 5 mm width (5 x 16 x 5 mm).
SKF 625-2RS1/C3MLHT23 is a reference of deep groove ball bearing, within Bearings. Request a quote for 625-2RS1/C3MLHT23 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing is an essential component for supporting radial and axial loads in rotating equipment. Its single-row ball design and deep raceways allow it to run at high speeds with low maintenance. At MR Accesorios Industriales we supply this brand so your plant operates without interruptions. If you need to replace a bearing, send us the part number and we will quote you.
The designation of this series combines several suffixes indicating key features. For example, in 625-2RS1/C3MLHT23, the numeric prefix defines the size; 2RS1 indicates rubber seal on both sides; C3 indicates greater internal radial clearance than standard; and MLHT specifies a special high-temperature lubricant. This nomenclature allows you to quickly identify the bearing's properties and choose the right one for your application.
These bearings are used in electric motors, pumps, fans, conveyors and agricultural machinery. In Argentina, they are common in industrial plants, workshops and continuous process equipment. Their ability to withstand combined loads and rotate at high speeds makes them versatile. When selecting, consider operating temperature, presence of contaminants and loads. The 2RS1 seal protects against dust and moisture, while C3 clearance compensates for thermal expansion.
For correct assembly, verify shaft and housing alignment, and apply the proper fitting load. MLHT lubrication is formulated for high temperatures, but still monitor the relubrication interval if possible. Avoid striking the bearing during installation and use proper tools. If the bearing operates in corrosive environments, evaluate additional seals. Careful assembly extends service life and reduces vibration.
Deep groove ball bearings are interchangeable between manufacturers if dimensions and suffixes match. An SKF code may have an equivalent in other brands, but always verify tolerances and clearance. Not all suffixes are universal; for example, the 2RS1 seal may correspond to 2RS in another brand. Consult us if you need help finding the correct equivalent without risks.
If you need this SKF bearing, send us the full part number via WhatsApp and we will quote you promptly. We can also advise you on installation and maintenance. Do not hesitate to contact us to keep your production running.
Dimensions
Boundary dimensions of the basic designation 625 per ISO 15: 5 x 16 x 5 mm (d x D x B).
- Bore
- 5mm
- Outside diameter (D)
- 16mm
- Width (B)
- 5mm
The same size in other brands
Pages from other brands with the basic designation 625: 5 x 16 x 5 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 625-2RS1/C3MLHT23 bearing?
- The SKF 625-2RS1/C3MLHT23 bearing has a 5 mm bore, a 16 mm outside diameter and a 5 mm width (5 x 16 x 5 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 625.
- What does the C3 suffix mean on this bearing?
- C3 indicates greater internal radial clearance than standard. It is used when there is thermal expansion due to high temperatures or interference fits, to prevent the bearing from operating preloaded and failing prematurely.
- Does this bearing come with seals on both sides?
- Yes, the 2RS1 suffix indicates rubber seal on both sides, which protects against dust, moisture and lubricant loss. It is suitable for contaminated environments, although not for immersion.
- Can I replace an SKF bearing with another brand?
- Yes, if dimensions, clearance and seal type match. Verify the suffixes, because they may vary between manufacturers. At MR we help you find the correct equivalent for your equipment.