Deep groove ball bearing SKF 624-2Z

SKF 624-2Z is a deep groove ball bearing reference, within Bearings. Request a quote for 624-2Z via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SKF series 60 deep groove ball bearings are thin-section components that support radial and axial loads in both directions. They incorporate Z or 2Z shields to retain lubricant and prevent particles from entering. They are used in electric motors, pumps, fans and light-duty transmissions. MR Accesorios Industriales offers them as an official brand and helps you choose the correct code.

The designation of these bearings follows a clear scheme. The base number, such as 6000, 6001 or 6002, identifies the size and series 60, which is characterized by its thin section. The suffixes indicate shields: Z has a metal shield on one side and 2Z has shields on both sides. For example, 6000-2Z has two shields, while 6000-Z has only one. These shields are not hermetic seals, but they reduce the entry of contaminants and grease loss.

In Argentine industry, these bearings appear in low- and medium-power electric motors, centrifugal pumps, fans, small compressors, machine tools and transmission equipment. They are also found in automotive applications, such as alternators and tensioners. Their compact size and ability to rotate at moderate and high speeds make them suitable for equipment where space is limited and low maintenance is required.

To select the correct bearing, take into account the radial and axial load, the rotation speed and the environmental conditions. Series 60 is thin-section, so it supports less load than other series, but allows higher speeds. If the environment has dust or moisture, versions with Z or 2Z shields are recommended. During mounting, check the alignment of the shaft and housing, and avoid striking the shields. Factory lubrication is usually sufficient for the service life, but demanding applications may require relubrication.

When replacing a bearing, it is common to find equivalences between different brands. Series 60 codes with Z and 2Z suffixes are standard and can usually be interchanged between manufacturers that follow the same dimensions. However, always check the tolerances and internal clearance, because they can vary. Do not invent codes: if you have doubts, ask us with the complete designation. At MR Accesorios Industriales we offer SKF as an official brand and can guide you on interchangeability.

If you need a quote for an SKF series 60 deep groove ball bearing, send us the code via WhatsApp. With the complete designation, such as 6003-2Z, we can identify the product and give you a quick response. We can also advise you if you are looking for an alternative or if you need to replace an existing bearing. Write to us and we will help you find the right solution for your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.