SKF 6213 Y/C78 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6213 Y/C78
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 13Bore
- 65 mm bore: 13 × 5.
- Y/C78Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6213 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6213 Y/C78 bearing has a 65 mm bore, a 120 mm outside diameter and a 23 mm width (65 x 120 x 23 mm).
SKF 6213 Y/C78 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6213 Y/C78 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF Y/C series deep groove ball bearing is an essential component for supporting radial and axial loads in industrial machinery. Its single-row ball design and steel cage allow high speeds and smooth operation. It is used in electric motors, pumps, fans and conveyors, among other applications. MR Accesorios Industriales supplies this brand to provide reliable solutions.
The designation of these bearings follows the SKF system: the basic number indicates the size, and the suffixes provide key information. For example, in 6206 Y/C78, the prefix 62 corresponds to the medium section series, and the suffix Y/C78 indicates a special execution, often with particular internal clearance and lubrication. In 6213 Y/C78, the 62 also indicates the series, while the 13 defines the bore diameter. Knowing these codes makes correct selection easier.
These bearings are used in a wide variety of industries in Argentina. They are common in electric motors, centrifugal pumps, industrial fans, conveyors and agricultural machinery. Their ability to support radial and moderate axial loads makes them versatile. In food, textile and petrochemical plants, their robustness and low maintenance are valued. MR Accesorios Industriales offers them for replacement and new projects.
To select the right bearing, consider the load, speed and environmental conditions. Check the internal clearance and the type of sealing: the Y/C suffixes often imply seals or flingers that protect against contaminants. Lubrication must be suitable for the working temperature. During assembly, ensure correct alignment and avoid impacts that damage the raceways. Proper fit on the shaft and housing extends service life.
Regarding equivalences, SKF deep groove ball bearings can be interchanged with those of other brands that follow the same basic designation, such as 6206 or 6213. However, specific suffixes may vary between manufacturers, so it is crucial to verify the exact characteristics. Not all Y/C suffixes are identical in other brands. Always consult the technical specifications before replacing a bearing.
To request a quote for the SKF deep groove ball bearing you need, send the complete code by WhatsApp to MR Accesorios Industriales.
Other SKF versions of the 6213 series
These versions of the 6213 series appear in SKF catalogues and do not have their own page on this site. Ask us about any of them with the part number: we will source it and send you a quote.
- SKF 6213 N
Dimensions
Boundary dimensions of the basic designation 6213 per ISO 15: 65 x 120 x 23 mm (d x D x B).
- Bore
- 65mm
- Outside diameter (D)
- 120mm
- Width (B)
- 23mm
The same size in other brands
Pages from other brands with the basic designation 6213: 65 x 120 x 23 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6213 Y/C78 bearing?
- The SKF 6213 Y/C78 bearing has a 65 mm bore, a 120 mm outside diameter and a 23 mm width (65 x 120 x 23 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6213.
- What does the Y/C78 suffix mean on an SKF bearing?
- The Y/C78 suffix indicates a special execution defined by SKF, which may include a particular internal clearance and specific lubrication. To know the exact details for your application, consult the data sheet or contact MR Accesorios Industriales.
- Is this bearing interchangeable with other brands?
- Yes, in general deep groove ball bearings with the same basic designation (for example, 6206) are interchangeable between brands. However, suffixes may differ, so it is recommended to verify the technical specifications before replacing.
- What are the typical applications of the 62 series?
- The 62 series, of medium section, is used in electric motors, pumps, fans, conveyors and machinery in general. It supports radial and moderate axial loads, and is suitable for high speeds. It is a versatile option in Argentine industry.