SKF 6212-2Z/C4HVT376 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6212-2Z/C4HVT376
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 12Bore
- 60 mm bore: 12 × 5.
- 2Z/C4HVT376Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6212 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6212-2Z/C4HVT376 bearing has a 60 mm bore, a 110 mm outside diameter and a 22 mm width (60 x 110 x 22 mm).
SKF 6212-2Z/C4HVT376 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6212-2Z/C4HVT376 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing is an essential component for supporting radial and axial loads in rotating machinery. Its single-row ball design and deep raceways allow it to operate at high speeds with low maintenance. MR Accesorios Industriales carries this brand and helps you select the correct code for your application.
The designation of these bearings follows an alphanumeric system. For example, in 6000-Z/C3HVT183, the prefix 6000 indicates the extra-light section series, while Z indicates a metal shield on one side. The suffix C3 defines an internal radial clearance greater than standard, and HVT183 specifies a variant with special heat treatment and lubrication for high temperatures. In 6212-2Z/C4HVT376, 6212 corresponds to the medium section series, 2Z indicates shields on both sides, C4 an even greater clearance and HVT376 a version with specific characteristics for severe conditions. Knowing these codes is key to ordering the exact replacement.
These bearings are used in a wide variety of industrial equipment in Argentina: electric motors, centrifugal pumps, fans, conveyors, machine tools and gearboxes. Their ability to withstand combined loads and operate at high revolutions makes them ideal for applications requiring precision and reliability. Industries such as food, chemical, petrochemical and manufacturing use them daily to keep their production lines running.
To select the right bearing, take into account the load, speed, operating temperature and environment. The seal (Z, 2Z, RS, 2RS) protects against contaminants; choose metal shield for dry environments and rubber seals for moisture or dust. Internal clearance (C3, C4) compensates for thermal expansion. Lubrication must be compatible with the temperature; HVT variants usually include high-performance greases. When mounting, ensure correct alignment and avoid impacts that damage the raceways.
There are equivalences between brands: an SKF 6205 bearing can be interchanged with codes from other firms such as FAG, NSK or NTN that follow the same dimensional designation. However, tolerances and clearances may vary, so it is essential to verify the technical specifications before replacing. MR Accesorios Industriales carries SKF as a brand and can advise you on interchangeability without compromising your equipment's performance.
If you need an SKF deep groove ball bearing, do not hesitate to contact us. Send the full code on WhatsApp to MR Accesorios Industriales and we will quote you promptly. We are your reliable partner for quality industrial spare parts.
Other SKF versions of the 6212 series
These versions of the 6212 series appear in SKF catalogues and do not have their own page on this site. Ask us about any of them with the part number: we will source it and send you a quote.
- SKF 6212 N
Dimensions
Boundary dimensions of the basic designation 6212 per ISO 15: 60 x 110 x 22 mm (d x D x B).
- Bore
- 60mm
- Outside diameter (D)
- 110mm
- Width (B)
- 22mm
The same size in other brands
Pages from other brands with the basic designation 6212: 60 x 110 x 22 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6212-2Z/C4HVT376 bearing?
- The SKF 6212-2Z/C4HVT376 bearing has a 60 mm bore, a 110 mm outside diameter and a 22 mm width (60 x 110 x 22 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6212.
- What does the HVT suffix mean on an SKF bearing?
- The HVT suffix indicates a variant with special heat treatment and lubrication for high temperatures. These bearings are designed to withstand extreme heat conditions, maintaining their performance and durability in demanding industrial applications.
- Can I replace an SKF bearing with another brand?
- Yes, there are dimensional equivalences between brands, but you must verify tolerances, clearance and lubrication. A similar code may not meet the same specifications. Consult us with the original code and we will advise you on the best available option.
- How do I choose between Z shield and RS seal?
- The Z metal shield protects against large particles and is ideal for dry environments. The RS rubber seal offers better protection against moisture and fine dust. The choice depends on your application conditions; if you have doubts, consult us.