SKF 6206-2RZ/C3GJN deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6206-2RZ/C3GJN
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 06Bore
- 30 mm bore: 06 × 5.
- 2RZ/C3GJNSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6206 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6206-2RZ/C3GJN bearing has a 30 mm bore, a 62 mm outside diameter and a 16 mm width (30 x 62 x 16 mm).
SKF 6206-2RZ/C3GJN is a reference of deep groove ball bearing, within Bearings. Request a quote for 6206-2RZ/C3GJN via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing of the RZ/C GJN series is a single row bearing with a non-contacting seal and high-performance grease. It is used in applications requiring low friction, high speed and protection against contaminants. MR Accesorios Industriales carries this line as a brand, with technical advice to select the correct variant for your equipment.
The designation …RZ/C…GJN reads as follows: the main number indicates the size (for example, 6206 corresponds to a bearing with a 30 mm bore diameter). The suffix 2RZ means it has two non-contacting rubber seals, one on each side. The C3 indicates an internal clearance greater than standard, useful when there is thermal expansion. And GJN identifies the high-temperature polyurea grease with which it is lubricated from the factory. The example 6206-2RZ/C3GJN combines all these features.
This type of bearing is used in electric motors, pumps, fans, compressors and transmission equipment. In Argentine industry it is common in production lines, food and beverage plants, and in the metalworking sector. Its non-contacting seal reduces starting torque and allows higher speeds than a contacting seal, but without the full protection of an oil seal. That is why it is chosen when the environment has fine dust or moderate humidity.
To select the correct bearing, take into account the rotation speed, the radial and axial load, and the environmental conditions. The 2RZ seal is suitable if there is no direct exposure to liquids or coarse particles. The GJN grease works well over a wide temperature range, but if the equipment operates under severe conditions, it is advisable to evaluate a contacting seal. During mounting, verify the alignment of the shaft and the housing, and avoid striking the seals when installing.
As for equivalents, each manufacturer has its own nomenclature for seals and clearances. A bearing with a non-contacting seal from another brand may have a different part number but similar performance. Always verify the main dimensions (bore, outer diameter and width) and the clearance type. MR Accesorios Industriales carries SKF as a brand, and also offers alternatives from other brands to suit each need.
If you need this bearing, send us the complete part number on WhatsApp. At MR Accesorios Industriales we advise you so you can choose the correct variant for your application. We provide technical support and a personalized quote.
Dimensions
Boundary dimensions of the basic designation 6206 per ISO 15: 30 x 62 x 16 mm (d x D x B).
- Bore
- 30mm
- Outside diameter (D)
- 62mm
- Width (B)
- 16mm
The same size in other brands
Pages from other brands with the basic designation 6206: 30 x 62 x 16 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6206-2RZ/C3GJN bearing?
- The SKF 6206-2RZ/C3GJN bearing has a 30 mm bore, a 62 mm outside diameter and a 16 mm width (30 x 62 x 16 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6206.
- What does the 2RZ suffix mean on an SKF bearing?
- The 2RZ suffix indicates that the bearing has two non-contacting rubber seals, one on each side. These seals reduce friction and allow high speeds, but they are not as tight as contacting seals. They are used in environments with fine dust or moderate humidity.
- Is GJN grease high-temperature?
- Yes, GJN grease is a polyurea grease formulated to work over a wide temperature range. It is the factory lubrication in many SKF bearings with this suffix. If your equipment operates at extreme temperatures, contact us to evaluate alternatives.
- How do I request a quote for this bearing?
- Write to us on WhatsApp with the complete bearing part number, for example 6206-2RZ/C3GJN. At MR Accesorios Industriales we reply with the quote and advise you if you need an equivalent variant.