SKF 6206-2RS1/C3VT486 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6206-2RS1/C3VT486
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 06Bore
- 30 mm bore: 06 × 5.
- 2RS1/C3VT486Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6206 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6206-2RS1/C3VT486 bearing has a 30 mm bore, a 62 mm outside diameter and a 16 mm width (30 x 62 x 16 mm).
SKF 6206-2RS1/C3VT486 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6206-2RS1/C3VT486 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing from series 62 is a medium-section component that supports moderate radial and axial loads. It is used in a wide variety of industrial equipment, such as electric motors, pumps, fans and machine tools. Its design allows high speeds and quiet operation. At MR Accesorios Industriales we carry this brand and advise you on choosing the right variant for your application.
The designation of these bearings follows a standardized system. In the examples 6202-2RS2/C4VT127 and 6206-2RS1/C3VT486, the prefix 62 indicates the medium-section series. The suffixes 2RS2 and 2RS1 indicate contact seals on both sides, which protect against the ingress of contaminants and retain the lubricant. The slash separates the additional specifications: C4 and C3 indicate the radial internal clearance, while VT127 and VT486 correspond to special characteristics, such as lubrication or particular treatment, defined by the manufacturer. Knowing these codes is key to ordering the correct replacement.
These bearings are used in industries such as food, chemical, petrochemical and manufacturing. In Argentina, they are common in electric motors of centrifugal pumps, industrial fans, conveyors and machine tools. Their ability to support combined loads and run at high speeds makes them versatile. They are also found in refrigeration equipment, compressors and transmission systems. Series 62, due to its medium section, offers a balance between load capacity and permissible speed, adapting to numerous applications.
To select the right bearing, consider the radial and axial load, the rotation speed and the environmental conditions. The 2RS seal is ideal for dusty or humid environments, as it prevents lubricant loss and contamination. The C3 or C4 internal clearance is chosen according to the working temperature and the fit on the shaft and housing. During mounting, ensure correct alignment and avoid impacts that damage the raceways. Proper lubrication and tight sealing extend service life. Always consult the technical specifications for each application.
There are equivalent bearings on the market from other brands, such as NSK, NTN, FAG or SNR, which can be interchanged if dimensions and specifications match. However, not all suffixes are equivalent; for example, a 2RS from one brand may have slightly different characteristics from another. Therefore, it is essential to verify the complete code and tolerances. At MR Accesorios Industriales, we sell and distribute SKF products and can guide you on interchangeability and source the exact reference you need.
If you have the code of the bearing you are looking for, send it via WhatsApp to MR Accesorios Industriales and we will quote you promptly. We can also advise you if you need help identifying the correct variant for your equipment. At MR Accesorios Industriales we offer reliable solutions for your SKF bearings.
Dimensions
Boundary dimensions of the basic designation 6206 per ISO 15: 30 x 62 x 16 mm (d x D x B).
- Bore
- 30mm
- Outside diameter (D)
- 62mm
- Width (B)
- 16mm
The same size in other brands
Pages from other brands with the basic designation 6206: 30 x 62 x 16 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6206-2RS1/C3VT486 bearing?
- The SKF 6206-2RS1/C3VT486 bearing has a 30 mm bore, a 62 mm outside diameter and a 16 mm width (30 x 62 x 16 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6206.
- What does the 2RS suffix mean on an SKF bearing?
- The 2RS suffix indicates that the bearing has contact seals on both sides. These seals protect against the ingress of dust, water and other contaminants, and retain the lubricant, extending the bearing's service life.
- What is the difference between C3 and C4 clearance?
- C3 radial internal clearance is greater than standard, and C4 is even greater. They are chosen when the bearing will operate at high temperatures or with fits that reduce clearance, to prevent it from running without clearance and becoming damaged.
- Can I replace an SKF bearing with another brand?
- Yes, if the dimensions and specifications match. Brands such as NSK, NTN or FAG offer equivalents. But verify the suffixes, as they may vary. At MR Accesorios Industriales we help you find the right reference.