SKF 6202-2Z/LHT23 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6202-2Z/LHT23
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 02Bore
- 15 mm bore: code 02 stands for 15 mm by standard.
- 2Z/LHT23Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6202 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6202-2Z/LHT23 bearing has a 15 mm bore, a 35 mm outside diameter and a 11 mm width (15 x 35 x 11 mm).
SKF 6202-2Z/LHT23 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6202-2Z/LHT23 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing of the Z/LHT series is a single row bearing with metal shield and special long-life lubrication. It is used in equipment requiring low maintenance and resistance to moderate temperatures, such as electric motors, fans and pumps. Its compact design supports moderate radial and axial loads. MR Accesorios Industriales carries this line as a brand so you can choose the exact reference for your application.
The designation of this series combines the basic bearing nomenclature with suffixes that indicate specific characteristics. For example, in 6202-2Z/LHT23, the numeric prefix identifies the size and dimensional series; the 2Z suffix indicates that the bearing has two metal shields (one on each side); and LHT23 corresponds to a type of long-life, high-performance grease. Knowing these codes allows you to quickly interpret the available variants and select the right version for your equipment.
This type of bearing is used in a wide variety of industrial applications in Argentina. It is commonly found in low and medium power electric motors, fans, centrifugal pumps, small compressors and transmission equipment. Industries such as food, textile, chemical and process industries in general rely on these bearings for their versatility and ease of mounting. Their metal shield makes them suitable for environments with moderate dust, although they do not replace seals for humidity or severe contamination conditions.
When selecting a bearing of this series, take into account the type of load, rotation speed and environmental conditions. The 2Z shield offers a barrier against particles, but if there is exposure to liquids or vapors, it is advisable to evaluate a higher-tightness seal. The LHT23 grease is formulated for extended relubrication intervals and moderate operating temperatures. During mounting, ensure correct alignment between shaft and housing, and avoid striking the rings to prevent damaging the raceways. Proper lubrication and precise fitting extend the bearing's service life.
Regarding equivalences and interchangeability, deep groove ball bearings with shields and special lubrication follow international dimensional standards, which allows them to be replaced by products from other manufacturers that share the same basic designation and equivalent suffixes. However, grease performance and the type of shield may vary between brands. Therefore, always verify that the replacement's characteristics match those of the original. At MR Accesorios Industriales we can advise you on finding the right alternative.
If you need a quote for this bearing or to inquire about other references, send us the complete part number on WhatsApp. At MR Accesorios Industriales we reply with the technical information you need for your application.
Other SKF versions of the 6202 series
These versions of the 6202 series appear in SKF catalogues and do not have their own page on this site. Ask us about any of them with the part number: we will source it and send you a quote.
- SKF 6202 N
Dimensions
Boundary dimensions of the basic designation 6202 per ISO 15: 15 x 35 x 11 mm (d x D x B).
- Bore
- 15mm
- Outside diameter (D)
- 35mm
- Width (B)
- 11mm
The same size in other brands
Pages from other brands with the basic designation 6202: 15 x 35 x 11 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6202-2Z/LHT23 bearing?
- The SKF 6202-2Z/LHT23 bearing has a 15 mm bore, a 35 mm outside diameter and a 11 mm width (15 x 35 x 11 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6202.
- What does the 2Z suffix mean on this bearing?
- The 2Z suffix indicates that the bearing has two metal shields, one on each side. These shields prevent the entry of large particles and retain the grease, but they are not liquid-tight. For environments with humidity or fine contamination, a more effective seal is recommended.
- Does LHT23 grease require frequent relubrication?
- LHT23 grease is designed for long service intervals under normal operating conditions. However, relubrication frequency depends on temperature, speed and contamination level. In demanding applications, it is advisable to follow the equipment manufacturer's recommendations or consult us.
- Can I replace this bearing with one from another brand?
- Yes, as long as the replacement has the same dimensions and protection and lubrication characteristics. Deep groove ball bearings follow international standards, but performance may vary between manufacturers. Always verify the complete designation and consult us if you have doubts.