Deep groove ball bearing SKF 6202-2RS2/C4VT127

SKF 6202-2RS2/C4VT127 is a deep groove ball bearing reference, within Bearings. Request a quote for 6202-2RS2/C4VT127 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF deep groove ball bearing from series 62 is a medium-section component that supports moderate radial and axial loads. It is used in a wide variety of industrial equipment, such as electric motors, pumps, fans and machine tools. Its design allows high speeds and quiet operation. At MR Accesorios Industriales we carry this official brand and advise you on choosing the right variant for your application.

The designation of these bearings follows a standardized system. In the examples 6202-2RS2/C4VT127 and 6206-2RS1/C3VT486, the prefix 62 indicates the medium-section series. The suffixes 2RS2 and 2RS1 indicate contact seals on both sides, which protect against the ingress of contaminants and retain the lubricant. The slash separates the additional specifications: C4 and C3 indicate the radial internal clearance, while VT127 and VT486 correspond to special characteristics, such as lubrication or particular treatment, defined by the manufacturer. Knowing these codes is key to ordering the correct replacement.

These bearings are used in industries such as food, chemical, petrochemical and manufacturing. In Argentina, they are common in electric motors of centrifugal pumps, industrial fans, conveyors and machine tools. Their ability to support combined loads and run at high speeds makes them versatile. They are also found in refrigeration equipment, compressors and transmission systems. Series 62, due to its medium section, offers a balance between load capacity and permissible speed, adapting to numerous applications.

To select the right bearing, consider the radial and axial load, the rotation speed and the environmental conditions. The 2RS seal is ideal for dusty or humid environments, as it prevents lubricant loss and contamination. The C3 or C4 internal clearance is chosen according to the working temperature and the fit on the shaft and housing. During mounting, ensure correct alignment and avoid impacts that damage the raceways. Proper lubrication and tight sealing extend service life. Always consult the technical specifications for each application.

There are equivalent bearings on the market from other brands, such as NSK, NTN, FAG or SNR, which can be interchanged if dimensions and specifications match. However, not all suffixes are equivalent; for example, a 2RS from one brand may have slightly different characteristics from another. Therefore, it is essential to verify the complete code and tolerances. At MR Accesorios Industriales, as SKF distributors, we can guide you on interchangeability and source the exact reference you need.

If you have the code of the bearing you are looking for, send it via WhatsApp to MR Accesorios Industriales and we will quote you promptly. We can also advise you if you need help identifying the correct variant for your equipment. With more than 80 years of experience, at MR Accesorios Industriales we offer reliable solutions for your SKF bearings.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.