SKF 6200-2RSHN deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6200-2RSHN
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 00Bore
- 10 mm bore: code 00 stands for 10 mm by standard.
- 2RSHNSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6200 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6200-2RSHN bearing has a 10 mm bore, a 30 mm outside diameter and a 9 mm width (10 x 30 x 9 mm).
SKF 6200-2RSHN is a reference of deep groove ball bearing, within Bearings. Request a quote for 6200-2RSHN via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF RSHN series deep groove ball bearing is a single row bearing with contact seals on both sides, designed to withstand moderate radial and axial loads in equipment where lubricant retention and contaminant exclusion are critical. Its sealed design makes it suitable for environments with dust, moisture or splashes, and it is a common choice in electric motors, pumps, fans and light-duty transmissions.
The RSHN series designation is read from its suffixes: RS indicates a contact seal on both sides, H indicates that the seal is designed for high lubricant retention, and N corresponds to a retaining ring groove in the outer ring. A specific example is 6200-2RSHN, where the number 6200 identifies the size and dimensional series, and the suffixes confirm the sealed configuration with groove. Understanding this logic allows you to order the correct bearing without ambiguity.
In Argentine industry, sealed deep groove ball bearings are used in low and medium power electric motors, centrifugal pumps, fans, small compressors, conveyor belts and machine tools. The combination of seal and retaining ring groove simplifies mounting in housings that need additional axial fixing, which is common in equipment where the bearing must be retained without complex side covers.
To select correctly, take into account the radial and axial load it will withstand, the rotation speed and the environmental conditions. The RSHN contact seal is effective against dust and moisture, but generates somewhat more friction than a non-contact seal; if the equipment runs at high speeds, evaluate whether it is suitable. Mounting must be done with appropriate tools, without striking the rings, and with careful alignment between shaft and housing to avoid parasitic loads.
SKF deep groove ball bearings are interchangeable with those of other brands that follow the same standardized dimensions and the same seal type. When replacing, verify that the suffix code matches in seal and groove; it is not enough for the dimensional number to be the same. If you have doubts, the complete code printed on the bearing is the most reliable reference to avoid errors.
If you need this bearing or want to confirm the equivalence with the one you are using, send the complete code via WhatsApp to MR Accesorios Industriales. We advise you so that you get the correct part and avoid unnecessary downtime.
Other SKF versions of the 6200 series
These versions of the 6200 series appear in SKF catalogues and do not have their own page on this site. Ask us about any of them with the part number: we will source it and send you a quote.
- SKF 6200 N
- SKF 6200 NR
Dimensions
Boundary dimensions of the basic designation 6200 per ISO 15: 10 x 30 x 9 mm (d x D x B).
- Bore
- 10mm
- Outside diameter (D)
- 30mm
- Width (B)
- 9mm
The same size in other brands
Pages from other brands with the basic designation 6200: 10 x 30 x 9 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6200-2RSHN bearing?
- The SKF 6200-2RSHN bearing has a 10 mm bore, a 30 mm outside diameter and a 9 mm width (10 x 30 x 9 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6200.
- What does the RSHN suffix mean on an SKF bearing?
- RS indicates a contact seal on both sides, H that the seal is designed for high lubricant retention, and N that the outer ring has a retaining ring groove. Together they define a sealed bearing with the possibility of additional axial fixing.
- Is this bearing suitable for environments with dust or moisture?
- Yes, the contact seal of the RSHN series is designed to retain lubricant and exclude contaminants such as dust and splashes. However, for very aggressive environments it is advisable to evaluate additional covers or a more robust seal depending on the application.
- How do I request a quote for this bearing at MR?
- Send the complete code via WhatsApp, for example 6200-2RSHN, and we will quote you. If you do not have it at hand, send us a photo or the main dimensions and we will help you identify it. MR Accesorios Industriales sells SKF as a brand.