SKF 608-2RSL/C3 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 608-2RSL/C3
- 60Series
- Deep groove ball bearings, 60 series. For the same bore, each series has a different outside diameter and width.
- 8Bore
- 8 mm bore.
- 2RSL/C3Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
608 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 608-2RSL/C3 bearing has a 8 mm bore, a 22 mm outside diameter and a 7 mm width (8 x 22 x 7 mm).
SKF 608-2RSL/C3 is a reference of deep groove ball bearing, within Bearings. Request a quote for 608-2RSL/C3 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing is an essential component for supporting radial and axial loads in rotating machinery. Its single-row ball design with deep raceways allows high speeds and low maintenance. The 2RSL and C3 suffixes indicate sealing and internal clearance, adapting to various industrial applications.
The designation of these bearings follows a clear system. For example, in 6000-2RSL/C3, the prefix 60 indicates the medium section series, followed by the diameter code. The suffix 2RSL indicates low-friction sealing on both sides, while C3 specifies an internal radial clearance greater than standard. This nomenclature allows you to quickly identify the technical characteristics.
These bearings are used in a wide variety of industries in Argentina, such as food, textile, automotive and machine tools. They are common in electric motors, pumps, fans and conveyors. Their ability to withstand high speeds and combined loads makes them versatile for equipment requiring reliability and long service life.
To select the right bearing, consider the load, speed and environmental conditions. The 2RSL seal protects against contaminants and retains lubricant, ideal for dirty or humid environments. C3 clearance is recommended when there is thermal expansion or interference fits. During mounting, ensure correct alignment and avoid impacts that could damage the raceways.
Regarding equivalences, SKF deep groove ball bearings can be interchanged with those of other brands that follow the same dimensional designation. However, always verify tolerances and internal clearance, as they may vary between manufacturers. MR Accesorios Industriales sells SKF as a brand.
To request a quote for the bearing you need, send the complete code via WhatsApp to MR Accesorios Industriales. Our technical team will advise you. We offer reliable solutions for Argentine industry.
Dimensions
Boundary dimensions of the basic designation 608 per ISO 15: 8 x 22 x 7 mm (d x D x B).
- Bore
- 8mm
- Outside diameter (D)
- 22mm
- Width (B)
- 7mm
The same size in other brands
Pages from other brands with the basic designation 608: 8 x 22 x 7 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 608-2RSL/C3 bearing?
- The SKF 608-2RSL/C3 bearing has a 8 mm bore, a 22 mm outside diameter and a 7 mm width (8 x 22 x 7 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 608.
- What does the 2RSL suffix mean on an SKF bearing?
- The 2RSL suffix indicates that the bearing has low-friction seals on both sides. These seals protect against contaminant ingress and retain lubrication, extending service life in demanding environments.
- When should you choose a bearing with C3 clearance?
- C3 clearance is suitable when the bearing operates at high temperatures that cause thermal expansion, or when mounted with interference fits on the shaft or housing. Also in applications where greater tolerance to slight misalignment is required.
- How do I request a quote for SKF bearings at MR?
- You can send the exact bearing code via WhatsApp to MR Accesorios Industriales. We will respond promptly with the information you need to make your inquiry.