SKF 6026 M/C3S0 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6026 M/C3S0
- 60Series
- Deep groove ball bearings, 60 series. For the same bore, each series has a different outside diameter and width.
- 26Bore
- 130 mm bore: 26 × 5.
- M/C3S0Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6026 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6026 M/C3S0 bearing has a 130 mm bore, a 200 mm outside diameter and a 33 mm width (130 x 200 x 33 mm).
SKF 6026 M/C3S0 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6026 M/C3S0 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF 60 series deep groove ball bearing is an essential component for withstanding radial and axial loads in industrial applications. Its single-row ball design and deep raceways allow high speeds and smooth operation. At MR Accesorios Industriales we carry this brand so you can choose the right bearing for your equipment.
The designation of these SKF bearings is interpreted as follows: the base number, for example 6014, indicates the type and dimension series. The 60 series corresponds to medium-section bearings, with a moderate outside diameter. The suffixes provide key information: M indicates that the cage is machined brass, suitable for high speeds and temperatures; C3 or C4 indicate an internal radial clearance greater than normal, useful when there are tight fits or thermal differences between shaft and housing; S0 means that the bearing was subjected to standard heat treatment for normal operating temperatures. Thus, a 6014 M/C3S0 combines a brass cage and C3 clearance.
These bearings are used in a wide variety of industrial equipment in Argentina: electric motors, centrifugal pumps, fans, gearboxes, machine tools, conveyors and process equipment. Their ability to withstand radial and axial loads in both directions makes them versatile. In food, chemical, textile or metallurgical plants, they are commonly found in belt or chain drives, where a reliable, low-maintenance support is required.
To select the right bearing, take into account the load, speed and environmental conditions. Sealing is critical: if there is dust or moisture, consider variants with seals or shields. The internal clearance should be chosen according to the fit and working temperature; C3 clearance usually compensates for thermal expansion. Lubrication can be grease or oil, and must be compatible with the brass cage. During mounting, ensure correct alignment and avoid blows that damage the raceways. Always consult the manufacturer's recommendations.
As for equivalents, SKF deep groove ball bearings can be interchanged with those of other brands that follow the same standardized dimensions. Suffix designations may vary between manufacturers, but the base number and dimension series usually match. If you need to replace a bearing, verify the dimensions and required clearance. At MR Accesorios Industriales we can advise you to find the right equivalent, without compromising your equipment's performance.
If you already have your bearing code, send it by WhatsApp and we will quote you. At MR Accesorios Industriales we carry SKF bearings. Write to us and we will help you select the correct bearing for your application.
Dimensions
Boundary dimensions of the basic designation 6026 per ISO 15: 130 x 200 x 33 mm (d x D x B).
- Bore
- 130mm
- Outside diameter (D)
- 200mm
- Width (B)
- 33mm
The same size in other brands
Pages from other brands with the basic designation 6026: 130 x 200 x 33 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6026 M/C3S0 bearing?
- The SKF 6026 M/C3S0 bearing has a 130 mm bore, a 200 mm outside diameter and a 33 mm width (130 x 200 x 33 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6026.
- What does the C3 suffix mean on an SKF bearing?
- The C3 suffix indicates an internal radial clearance greater than normal. It is used when the fit is tight or there are thermal gradients, to prevent the bearing from becoming preloaded and failing prematurely.
- What is the difference between an M cage and a steel cage?
- The M cage is machined brass, which gives it greater strength and allows it to work at high speeds and temperatures. The stamped steel cage is more economical and suitable for standard applications.
- How do I know if I need a bearing with C4 clearance?
- C4 clearance is greater than C3 and is used in applications with very tight fits or significant thermal differences between the inner and outer rings. Consult us with your equipment data to determine the most suitable one.