Deep groove ball bearing SKF 6024/C3

SKF 6024/C3 is a deep groove ball bearing reference, within Bearings. Request a quote for 6024/C3 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The deep groove ball bearing is the most common type of bearing. It supports moderate radial and axial loads in both directions and is suitable for high speeds. The SKF 60 series features a thin section and the ability to operate in tight spaces. It is used in electric motors, pumps, fans, and light transmissions. MR Accesorios Industriales markets this line with technical advice so you can choose the right internal clearance.

The designation of these bearings follows a clear scheme. The basic number, such as 6000, 6001, or 6002, indicates the size and series. The 60 series has a thin section compared with other series. Suffixes provide additional information: /C2 indicates an internal clearance less than normal, while /C3 indicates an internal clearance greater than normal. For example, 6005/C2 and 6005/C3 share the same size but have different clearance. Knowing these suffixes is key to selecting the right bearing for the application.

These bearings are used in a wide variety of industrial equipment in Argentina. They are common in low- and medium-power electric motors, centrifugal pumps, fans, small compressors, machine tools, and transmission equipment. They are also found in automotive applications, such as alternators and tensioners. Their versatile design makes them suitable for food, textile, chemical, and general manufacturing industries. The 60 series is common in equipment where radial space is limited and smooth, quiet operation is required.

To select the right bearing, take into account the load, speed, and environmental conditions. C2 internal clearance is used when a more precise fit and low operating temperatures are needed, while C3 is for applications with high temperatures or interference fits, where clearance decreases during operation. Sealing can be open, with shields, or with seals, depending on contamination. Lubrication can be grease or oil. During installation, ensure correct alignment and avoid impacts that damage the raceways. Always check the manufacturer's recommendations.

There are equivalent bearings from other brands on the market that follow similar designations. The 60 series with C2 or C3 suffixes is an international standard, so you will find interchangeability among different manufacturers. However, not all products have the same quality or tolerances. It is important to verify that the bearing complies with the applicable standards. MR Accesorios Industriales markets SKF as an official brand, which guarantees backing and reliability. If you need to replace a bearing, you can compare the dimensions and internal clearance.

If you already have your bearing part number, send it via WhatsApp to MR Accesorios Industriales and we'll provide a quote. We can also advise you if you are unsure between C2 or C3 clearance, or if you need a variant with special sealing. With more than 80 years in the industry, at MR we have the experience to help you choose the right SKF bearing for your equipment. Write to us and we'll reply as soon as possible.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.