SKF 6009-2RS1/C3GJN deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6009-2RS1/C3GJN
- 60Series
- Deep groove ball bearings, 60 series. For the same bore, each series has a different outside diameter and width.
- 09Bore
- 45 mm bore: 09 × 5.
- 2RS1/C3GJNSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6009 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6009-2RS1/C3GJN bearing has a 45 mm bore, a 75 mm outside diameter and a 16 mm width (45 x 75 x 16 mm).
SKF 6009-2RS1/C3GJN is a reference of deep groove ball bearing, within Bearings. Request a quote for 6009-2RS1/C3GJN via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF deep groove ball bearings of the 60 series are medium-section components that support radial and axial loads in both directions. In this selection, they come with bilateral seals and high-temperature grease, making them suitable for demanding environments. They are used in electric motors, pumps, fans and transmissions. MR Accesorios Industriales sells this line as a brand and advises you to choose the correct part number.
The designation of these bearings is read in parts. The base number, such as 6006, indicates the series and size. The suffix 2RS1 or 2RS2 indicates that they have contact seals on both sides, with different designs. The letter C followed by a number, for example C3 or C4, defines the internal clearance: the higher the number, the greater the clearance. Finally, GJN identifies the high-temperature grease with which they are lubricated from the factory. Thus, a 6006-2RS1/C3GJN is a sealed bearing, with C3 clearance and high-temperature grease.
These bearings are used in electric motors, centrifugal pumps, industrial fans, compressors and gearboxes. In Argentina, you find them in food, petrochemical, textile plants and in the metalworking sector. Their bilateral seals protect them against dust and moisture, while the GJN grease resists high temperatures, which extends the service life in equipment that operates continuously. They are a reliable option for maintenance and replacement.
To select the right bearing, take into account the load, speed and working temperature. The C3 or C4 internal clearance is key when there are interference fits or thermal gradients. The 2RS1 or 2RS2 seal prevents lubricant loss and the entry of contaminants. During assembly, check the alignment of the shaft and housing, and use suitable tools to avoid damaging the seals. Lubrication comes from the factory; do not replace it unless the manufacturer indicates so.
Regarding equivalences, deep groove ball bearings are interchangeable between brands if dimensions and suffixes match. An SKF code 6006-2RS1/C3GJN can be replaced by equivalents from other brands that have the same specifications. Always verify the complete code and operating conditions before replacing. MR Accesorios Industriales sells SKF as a brand and can help you find the correct reference.
If you need to replace a bearing, send us the complete code via WhatsApp. At MR Accesorios Industriales we quote you and advise you so that the choice is correct. Let's not improvise with maintenance: a suitable bearing prevents downtime and unnecessary costs.
Other SKF versions of the 6009 series
These versions of the 6009 series appear in SKF catalogues and do not have their own page on this site. Ask us about any of them with the part number: we will source it and send you a quote.
- SKF 6009 N
Dimensions
Boundary dimensions of the basic designation 6009 per ISO 15: 45 x 75 x 16 mm (d x D x B).
- Bore
- 45mm
- Outside diameter (D)
- 75mm
- Width (B)
- 16mm
The same size in other brands
Pages from other brands with the basic designation 6009: 45 x 75 x 16 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6009-2RS1/C3GJN bearing?
- The SKF 6009-2RS1/C3GJN bearing has a 45 mm bore, a 75 mm outside diameter and a 16 mm width (45 x 75 x 16 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6009.
- What does the GJN suffix mean in an SKF bearing?
- GJN indicates that the bearing is lubricated from the factory with a high-temperature grease. This grease withstands demanding thermal conditions and is ideal for applications where the bearing does not receive frequent maintenance.
- What is the difference between 2RS1 and 2RS2?
- Both suffixes indicate contact seals on both sides. The difference is in the seal design: 2RS1 and 2RS2 may vary in material or geometry. Consult the specifications to choose the most suitable according to the environment.
- Can I replace an SKF bearing with another brand?
- Yes, as long as the main dimensions and relevant suffixes match. Verify the complete code and operating conditions. If you have doubts, consult us with the original code and we will advise you.