SKF 6006-2ZN deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6006-2ZN
- 60Series
- Deep groove ball bearings, 60 series. For the same bore, each series has a different outside diameter and width.
- 06Bore
- 30 mm bore: 06 × 5.
- 2ZNSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6006 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6006-2ZN bearing has a 30 mm bore, a 55 mm outside diameter and a 13 mm width (30 x 55 x 13 mm).
SKF 6006-2ZN is a reference of deep groove ball bearing, within Bearings. Request a quote for 6006-2ZN via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing of the ZN series is a single-row bearing with metal shield and locating ring. It is used in equipment where the bearing must be retained axially in the housing, such as electric motors, pumps and gearboxes. MR Accesorios Industriales supplies this line and helps you choose the correct code for your application.
The designation of this series combines letters and numbers that indicate key characteristics. For example, in 6006-2ZN, the 2Z indicates that the bearing has two metal shields, one on each side, which prevent the entry of particles and the escape of lubricant. The final N indicates that it incorporates a locating ring on the outer ring, which allows it to be positioned axially within the housing. Knowing these suffixes helps you order the exact replacement.
This type of bearing is used in industries such as food, chemical, metallurgy and plastics. It is commonly found in electric motors, centrifugal pumps, fans, conveyor belts and machine tools. Its ability to support radial and moderate axial loads, together with the protection and the locating ring, makes it suitable for equipment where precise positioning and some resistance to contamination are required.
When selecting a bearing of this series, take into account the type of load, the rotation speed and the environmental conditions. The Z metal shield is suitable for environments with dust or moderate humidity, but if there are aggressive liquids or vapors, contact seals should be evaluated. The N locating ring simplifies assembly by avoiding the need for additional covers or stops. Verify the alignment of the shaft and housing, and lubricate according to the manufacturer's recommendations.
Regarding equivalences, deep groove ball bearings with shields and locating ring from different brands are usually interchangeable if the main dimensions and the type of execution match. However, not all manufacturers use the same suffixes, so it is important to confirm the full code and tolerances. MR Accesorios Industriales can advise you to find the right equivalence without risks.
If you need this bearing or want to confirm that it is the right one for your equipment, send us the code by WhatsApp. At MR Accesorios Industriales we respond with the quote and the technical information you need.
Other SKF versions of the 6006 series
These versions of the 6006 series appear in SKF catalogues and do not have their own page on this site. Ask us about any of them with the part number: we will source it and send you a quote.
- SKF 6006 NR
Dimensions
Boundary dimensions of the basic designation 6006 per ISO 15: 30 x 55 x 13 mm (d x D x B).
- Bore
- 30mm
- Outside diameter (D)
- 55mm
- Width (B)
- 13mm
The same size in other brands
Pages from other brands with the basic designation 6006: 30 x 55 x 13 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6006-2ZN bearing?
- The SKF 6006-2ZN bearing has a 30 mm bore, a 55 mm outside diameter and a 13 mm width (30 x 55 x 13 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6006.
- What does the ZN suffix mean on an SKF bearing?
- The Z indicates a metal shield on one side; 2Z, two shields. The N indicates that the bearing has a locating ring on the outer ring for axial retention. Thus, ZN combines both characteristics in a single bearing.
- Is this bearing suitable for high temperatures?
- The standard series works within a normal thermal range. For elevated temperatures there are variants with special material cages or high-temperature lubricant. Consult us with the working temperature and we will indicate the appropriate option.
- How do I request a quote for this bearing?
- Write to us on WhatsApp with the full code, for example 6006-2ZN, and the quantity you need. We will respond with the quote. If you are not sure of the code, send us a photo or the measurements and we will help you identify it.