SKF 6003 2RSJEM deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6003 2RSJEM
- 60Series
- Deep groove ball bearings, 60 series. For the same bore, each series has a different outside diameter and width.
- 03Bore
- 17 mm bore: code 03 stands for 17 mm by standard.
- 2RSJEMSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6003 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6003 2RSJEM bearing has a 17 mm bore, a 35 mm outside diameter and a 10 mm width (17 x 35 x 10 mm).
SKF 6003 2RSJEM is a reference of deep groove ball bearing, within Bearings. Request a quote for 6003 2RSJEM via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing of the RSJEM series is a single row bearing with double seal and snap ring groove. It is used in equipment where protection against contaminants and simple axial location are required. MR Accesorios Industriales supplies this line, with technical advice to select the correct size for your application.
The designation of this series combines several suffixes that indicate design features. The letters RS indicate double seal, J indicates stamped steel sheet cage, E represents a higher load capacity compared to the standard design and M corresponds to the snap ring groove on the outer ring. A typical example is 6003 2RSJEM, where the number 6003 identifies the basic size and the remaining suffixes the features mentioned. Knowing this nomenclature allows you to quickly interpret the properties of the bearing.
This type of bearing is used in a wide variety of industrial applications in Argentina. It is commonly found in electric motors, centrifugal pumps, fans, conveyors and machine tools. Its double seal makes it suitable for environments with dust, humidity or liquid splashes, while the snap ring groove facilitates axial location in housings that require retention. Industries such as food, chemical and metallurgical usually use these bearings for their versatility and ease of assembly.
To correctly select the bearing, take into account the radial and axial load it will support, the rotation speed and the environmental conditions. The RS seal offers a good barrier against contaminants, but if the environment is very aggressive, evaluate additional seals. The J sheet metal cage is suitable for most applications, although in cases of high accelerations a synthetic material cage may be required. The lifetime lubrication that these sealed bearings come with simplifies maintenance, but verify that the operating temperature does not exceed the lubricant limits.
When replacing a bearing, it is important to verify the equivalences between brands. Other manufacturers may offer products with similar designations, but the letters and numbers may vary. For example, the suffix 2RS is common to indicate double seal, while J and M may have equivalents in other nomenclatures. Always compare the main dimensions (bore, outer diameter and width) and functional characteristics before substituting. MR Accesorios Industriales can help you identify the correct reference.
If you need to request a quote for this bearing or ask about a specific size, send us the complete code by WhatsApp. At MR Accesorios Industriales we advise you so that you find the right bearing for your equipment.
Dimensions
Boundary dimensions of the basic designation 6003 per ISO 15: 17 x 35 x 10 mm (d x D x B).
- Bore
- 17mm
- Outside diameter (D)
- 35mm
- Width (B)
- 10mm
The same size in other brands
Pages from other brands with the basic designation 6003: 17 x 35 x 10 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6003 2RSJEM bearing?
- The SKF 6003 2RSJEM bearing has a 17 mm bore, a 35 mm outside diameter and a 10 mm width (17 x 35 x 10 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6003.
- What does the suffix RSJEM mean in an SKF bearing?
- The suffix RSJEM indicates that the bearing has double seal (RS), steel sheet cage (J), higher load capacity (E) and snap ring groove (M). These details define its use in contaminated environments and its axial location.
- Does this bearing come with lifetime lubrication?
- Yes, sealed bearings of this series usually come lubricated from the factory for their entire service life. However, verify the operating conditions; in cases of high temperatures or speeds, a special lubrication regime may be necessary.
- How do I request a quote for this bearing at MR?
- Send the complete bearing code, for example 6003 2RSJEM, by WhatsApp. The MR Accesorios Industriales team will respond with the alternatives for your application.