SKF 6002-2RSH/LHT23 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6002-2RSH/LHT23
- 60Series
- Deep groove ball bearings, 60 series. For the same bore, each series has a different outside diameter and width.
- 02Bore
- 15 mm bore: code 02 stands for 15 mm by standard.
- 2RSH/LHT23Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6002 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6002-2RSH/LHT23 bearing has a 15 mm bore, a 32 mm outside diameter and a 9 mm width (15 x 32 x 9 mm).
SKF 6002-2RSH/LHT23 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6002-2RSH/LHT23 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing of the RSH/LHT series is a sealed bearing with high-temperature grease, designed to carry moderate radial and axial loads under demanding conditions. It is used in electric motors, fans, pumps and equipment where the working temperature exceeds conventional ranges. Its double contact seal retains lubrication and blocks contaminants, extending service life in environments with dust or humidity. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct size.
The designation of these bearings combines the series number with suffixes that indicate specific characteristics. In the example 6002-2RSH/LHT23, the base number 6002 identifies a bearing of the 60 series, with a thin section and small bore diameter. The suffix 2RSH indicates rubber contact seals on both sides, which retain grease and prevent the entry of particles. The extension LHT23 corresponds to a high-temperature grease with an extended range. Knowing these suffixes is key to ordering the exact replacement.
In Argentine industry, these bearings appear in low power electric motors, centrifugal fans, small centrifugal pumps, compressors and drive equipment. They are also found in machine tools, conveyor belts and forced ventilation systems. Their ability to work at elevated temperatures makes them suitable for ovens, dryers and processes with residual heat. Being sealed, they tolerate environments with dust, chips or humidity without losing lubrication.
To select the correct bearing, verify the bore, outer diameter and width according to the application. The RSH seal is a contact seal and offers better protection than a non-contact seal, although it generates somewhat more friction. The LHT23 grease is formulated for high temperatures, so it should not be replaced with a conventional one. During mounting, align the supports well and avoid blows that deform the seals. Lubrication is for life in most cases.
SKF bearings of this series can be interchanged with equivalents from other brands that share dimensions and seal type. The key is to respect the full part number, including the suffixes, because a variant without seals or with standard grease does not offer the same performance. If the original equipment comes with a bearing with double sealing and high-temperature grease, replace it with one of similar characteristics. Always check the tolerances and internal clearance.
If you need this bearing, send us the full part number by WhatsApp to MR Accesorios Industriales. We help you identify the exact part and resolve questions about mounting or interchangeability. Request a quote with no obligation and receive personalized technical advice.
Dimensions
Boundary dimensions of the basic designation 6002 per ISO 15: 15 x 32 x 9 mm (d x D x B).
- Bore
- 15mm
- Outside diameter (D)
- 32mm
- Width (B)
- 9mm
The same size in other brands
Pages from other brands with the basic designation 6002: 15 x 32 x 9 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6002-2RSH/LHT23 bearing?
- The SKF 6002-2RSH/LHT23 bearing has a 15 mm bore, a 32 mm outside diameter and a 9 mm width (15 x 32 x 9 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6002.
- What does the RSH suffix mean on an SKF bearing?
- RSH indicates that the bearing has rubber contact seals on both sides. These seals retain the lubricating grease and block the entry of dust, water or particles, which extends service life in contaminated environments.
- For what temperatures is the LHT23 grease designed?
- LHT23 grease is a high-temperature lubricant, suitable for applications where the bearing operates above conventional ranges. Contact us with the full part number to verify compatibility with your equipment.
- Can I replace this bearing with one from another brand?
- Yes, as long as the dimensions and the seal type match. It is important to keep the suffixes that indicate double sealing and high-temperature grease. Send us the original part number and we will advise you on the equivalent.