Deep groove ball bearing SKF 6001-2RSL/GFJ

SKF 6001-2RSL/GFJ is a deep groove ball bearing reference, within Bearings. Request a quote for 6001-2RSL/GFJ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF deep groove ball bearing of the RSL/GFJ series is a single-row component designed to carry moderate radial and axial loads in both directions. Its RSL double seal and GFJ grease make it suitable for equipment where the goal is to retain lubricant and block the entry of contaminants. It is available in metric sizes and is used in electric motors, pumps, fans and light-duty transmissions. MR Accesorios Industriales supplies this official brand and helps you choose the exact part number.

The designation of this series combines the size number with the suffixes RSL and GFJ. The base number, as in the example 6001, defines the main dimensions according to the deep groove ball bearing standard. The suffix RSL indicates low-friction sealing on both sides, designed to retain grease and exclude dust. The suffix GFJ identifies the factory grease with which it is lubricated. Thus, a part number such as 6001-2RSL/GFJ reads as a bearing of the 6001 series, sealed on both sides and lubricated with GFJ grease.

In Argentine industry, these bearings appear in low and medium power electric motors, centrifugal pumps, fans, light conveyor belts and machine tools. They are also found in packaging equipment, agitators and belt drive systems. Their sealed construction makes them suitable for environments with dust or moderate humidity, provided the temperature and speed conditions specified for the GFJ grease are respected. They are a common choice when a compact bearing with reduced maintenance is required.

To select the correct part number, take into account the shaft diameter, the housing and the loads of the equipment. The RSL seal offers low friction, but it is not intended for immersion or direct washing. Respect the alignment between shaft and support: excessive misalignment shortens bearing life. During mounting, avoid striking the seals and apply the mounting force on the appropriate ring. No additional lubricant is needed: the GFJ grease comes pre-measured from the factory. If the equipment operates at high temperatures, verify that the grease is compatible.

Sealed deep groove ball bearings have equivalents across manufacturers, but the suffixes change from brand to brand. The same size may be offered with different types of sealing, internal clearance or lubricant. Therefore, when looking for a replacement, do not rely on the base number alone: also compare the type of seal, the grease and the tolerance. At MR Accesorios Industriales we can guide you on interchangeability, always starting from the full part number and the operating conditions. We do not invent equivalents: we ask you for the necessary data to advise you properly.

If you already have the bearing part number, send it by WhatsApp to MR Accesorios Industriales and we will quote it. If you do not have it at hand, send us the shaft and housing dimensions, and the type of equipment where it is mounted. With that information we can identify the RSL/GFJ series you need. More than 80 years supporting Argentine industry back us in helping you choose the right component.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.