SKF 6000-ZTN9/C3LT deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6000-ZTN9/C3LT
- 60Series
- Deep groove ball bearings, 60 series. For the same bore, each series has a different outside diameter and width.
- 00Bore
- 10 mm bore: code 00 stands for 10 mm by standard.
- ZTN9/C3LTSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6000 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6000-ZTN9/C3LT bearing has a 10 mm bore, a 26 mm outside diameter and a 8 mm width (10 x 26 x 8 mm).
SKF 6000-ZTN9/C3LT is a reference of deep groove ball bearing, within Bearings. Request a quote for 6000-ZTN9/C3LT via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing from the series with ZTN seal and C3LT clearance is a precision component for rotating shafts. Its single-row design withstands moderate radial and axial loads, and the integrated seal retains lubricant and blocks contaminants. It is used in electric motors, pumps, fans and light transmissions. MR Accesorios Industriales sells this SKF line; send us the part number on WhatsApp and we will send you the quote.
The designation of these bearings combines letters and numbers that indicate size and variants. The base number defines the bore diameter and the section. The suffix ZTN corresponds to a specific seal for the series, designed to retain lubrication and exclude particles. The suffix C3LT combines a radial clearance greater than standard (C3) with long-life lubrication (LT). Thus, a code such as 6000-ZTN9/C3LT reads: 6000 series, ZTN seal, C3 clearance and LT grease. See more variants in our catalogue.
These bearings are used in equipment where low noise and reduced maintenance are required. In Argentine industry you will find them in low and medium power electric motors, centrifugal pumps, fans, small compressors, machine tools and transmission equipment. Also in automotive and household appliance applications. Their seal makes them suitable for environments with dust or moderate humidity, as long as mounting and lubrication conditions are respected.
To select the right bearing, take into account radial and axial load, rotational speed and environmental conditions. C3 clearance is recommended when there are interference fits or thermal gradients. The ZTN seal protects against contaminants; verify that the housing and shaft are clean and free of burrs. During mounting, apply force on the corresponding ring and avoid direct blows. Alignment between shaft and housing is key to avoid additional loads and extend service life.
Regarding equivalences, deep groove ball bearings with special seals and clearance are available from different brands under their own nomenclatures. If you need to replace an existing bearing, the safest approach is to compare the main dimensions (bore, outer diameter and width) and the sealing and clearance conditions. Do not rely on the code alone: it can vary between manufacturers. At MR Accesorios Industriales we can help you identify the right reference.
To request a quote, send us on WhatsApp the complete part number of the bearing you need, for example 6000-ZTN9/C3LT, or the measurements and characteristics of your application. Our technical team reviews the inquiry and replies with the corresponding reference. MR Accesorios Industriales supports Argentine industry with power transmission components.
Dimensions
Boundary dimensions of the basic designation 6000 per ISO 15: 10 x 26 x 8 mm (d x D x B).
- Bore
- 10mm
- Outside diameter (D)
- 26mm
- Width (B)
- 8mm
The same size in other brands
Pages from other brands with the basic designation 6000: 10 x 26 x 8 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6000-ZTN9/C3LT bearing?
- The SKF 6000-ZTN9/C3LT bearing has a 10 mm bore, a 26 mm outside diameter and a 8 mm width (10 x 26 x 8 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6000.
- What does the C3LT suffix mean on this bearing?
- C3 indicates an internal radial clearance greater than standard, suitable for interference fits or high temperatures. LT corresponds to long-life lubrication. Together, these suffixes define a bearing ready for demanding applications with reduced maintenance.
- Does this bearing come with seals on both sides?
- The ZTN suffix refers to an integrated seal that may be on one or both sides depending on the variant. To confirm the exact configuration of the part number you need, ask us on WhatsApp and we will advise you.
- How do I know if I can replace a bearing from another brand with this SKF one?
- Compare the main dimensions (bore, outer diameter and width) and the clearance and sealing conditions. Codes may vary between manufacturers, but if the measurements and specifications match, replacement is possible. If you have doubts, send us the data and we will help you.