SKF 6000-2Z/C3VT127 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6000-2Z/C3VT127
- 60Series
- Deep groove ball bearings, 60 series. For the same bore, each series has a different outside diameter and width.
- 00Bore
- 10 mm bore: code 00 stands for 10 mm by standard.
- 2Z/C3VT127Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6000 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6000-2Z/C3VT127 bearing has a 10 mm bore, a 26 mm outside diameter and a 8 mm width (10 x 26 x 8 mm).
SKF 6000-2Z/C3VT127 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6000-2Z/C3VT127 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF deep groove ball bearings are essential components for withstanding radial and axial loads in rotating machinery. Their robust and versatile design makes them suitable for a wide range of industrial applications. At MR Accesorios Industriales we sell the SKF brand, recognized for its quality and reliability. If you are looking for a bearing for your equipment, request a quote via WhatsApp.
The designation of these bearings follows a system that indicates key characteristics. For example, in 6000-2Z/C3VT127, the prefix 6000 corresponds to the extra-thin section deep groove ball bearing series. The suffix 2Z indicates that it incorporates two metal shield plates. The /C3 indication specifies an internal radial clearance greater than normal, and VT127 identifies a particular lubricant and treatment specification. Other examples such as 6209-2Z/C4VT269 show the 62 series, medium section, with an even greater C4 clearance. Knowing these codes allows you to select the right bearing for your application.
These bearings are used in a wide variety of industries in Argentina, such as food, chemical, textile and metallurgical. They are common in electric motors, pumps, fans, conveyor belts and power transmission machinery. Thanks to their ability to withstand combined loads, they are ideal for equipment requiring high speed and precision. Their sealed design makes them suitable for environments with dust or moderate humidity, extending their service life.
To select the correct bearing, take into account the load, speed and environmental conditions. The C3 or C4 internal clearance is crucial in applications where operating temperatures cause expansion, thus avoiding excessive preload. The 2Z sealing offers protection against particles, but if there is contact with liquids, consider variants with rubber seals. During mounting, ensure precise alignment and adequate lubrication according to the VT specification. Careful installation extends bearing life.
In the market, there are equivalences between brands for deep groove ball bearings. For example, a 6206-2Z/C3 from SKF can be interchanged with similar codes from other recognized brands, as long as dimensions and clearance and sealing specifications match. However, not all suffixes are universal; lubricant and treatment designations may vary. Therefore, it is essential to verify compatibility before replacing a bearing. At MR Accesorios Industriales we can advise you on the best option.
If you need an SKF deep groove ball bearing, at MR Accesorios Industriales we help you find it. Send the complete code via WhatsApp and we will quote you promptly. We offer quality products and technical advice. Do not hesitate to contact us with any questions or to request your quote.
Dimensions
Boundary dimensions of the basic designation 6000 per ISO 15: 10 x 26 x 8 mm (d x D x B).
- Bore
- 10mm
- Outside diameter (D)
- 26mm
- Width (B)
- 8mm
The same size in other brands
Pages from other brands with the basic designation 6000: 10 x 26 x 8 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6000-2Z/C3VT127 bearing?
- The SKF 6000-2Z/C3VT127 bearing has a 10 mm bore, a 26 mm outside diameter and a 8 mm width (10 x 26 x 8 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6000.
- What does the 2Z suffix mean in an SKF bearing?
- The 2Z suffix indicates that the bearing has two metal shield plates, one on each side. These shields prevent the entry of dust and large particles, but they do not seal against liquids. They are suitable for applications requiring moderate protection and high speed.
- What is the difference between C3 and C4 clearance?
- The C3 internal radial clearance is greater than normal, and C4 is even greater. They are used in applications where operating temperatures cause thermal expansion, preventing the bearing from becoming overloaded. Choose the clearance according to the temperature and fit conditions of your equipment.
- Can I replace an SKF bearing with another brand?
- Yes, as long as the main dimensions and clearance and sealing specifications match. However, lubricant and treatment suffixes may vary between manufacturers. Consult us with the original code and we will advise you on the right equivalent.