SKF 516X576X25 HSS8 V radial shaft seal

SKF 516X576X25 HSS8 V is a reference of radial shaft seal, within Seals. Request a quote for 516X576X25 HSS8 V via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF HSS V series radial shaft seal is an elastomeric lip seal with metal reinforcement, designed to retain lubricant and exclude contaminants on rotating shafts. It is mounted in cylindrical housings and works on the shaft with a flexible lip that compensates for small misalignments. It is a reliable solution for pumps, electric motors, gearboxes and industrial equipment in general. MR Accesorios Industriales carries this line as a brand so you can replace worn seals with a known reference.

The designation of the HSS V series is read directly: the first number indicates the inner diameter, followed by the outer diameter and then the width, all in millimeters. For example, 516X576X25 HSS8 V corresponds to a seal with 516 mm inner diameter, 576 mm outer diameter and 25 mm width, with the HSS8 variant and V ending. The letters HSS identify the category of radial seals, while the number that accompanies them and the final letter indicate the lip design and the elastomer material. This nomenclature allows you to identify the replacement part just by reading the code engraved on the piece.

In Argentine industry, SKF HSS V series radial shaft seals are used in pumping equipment, electric motors, gear reducers, machine tools and transmission systems. They also appear in the food, chemical and petrochemical industries, where lubricant containment and exclusion of dust or liquids are critical. As a brand that MR carries, you find this line backed by a firm consolidated in the market. If your equipment operates with large-diameter shafts, this series is usually the right one.

To select the correct seal, check the shaft diameter, the housing diameter and the available width. The lip must rest on a ground and lubricated surface; avoid shafts with splines, scratches or excessive wear. Alignment between shaft and housing is key so the lip does not deform. If the seal incorporates a spring, make sure it stays on the lubricant side. Prior lubrication of the lip with the same grease or oil as the equipment facilitates assembly and extends service life.

SKF HSS V series radial shaft seals can be interchanged with other brands that follow the same dimensional nomenclature, such as NAK, TTO or CR. The key is to respect the inner diameter, outer diameter and width dimensions, as well as the lip type and material. In general, a seal with an equivalent code from another firm can replace the original if the dimensions match and the service conditions are similar. If in doubt, consult the manufacturer or a specialist before installing an alternative.

To request a quote for the SKF HSS V series seal you need, send the complete code via WhatsApp to MR Accesorios Industriales. With that data, our team identifies the part and responds promptly. We work with the leading brands and can advise you if you have to replace a worn seal. Do not hesitate to write to us: we are here to help you keep your equipment running.